HAZARD WARNING SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. Connect the 3 connectors and attach the wire harness clamp.

    2. B004CHSC01
      B004B1M Install in this Direction

      Temporarily place the claw of the integration control and panel assembly.

    3. Push the integration control and panel assembly to attach the claw and clip to install it.

  2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  4. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  5. INSTALL CONSOLE BOX ASSEMBLY

    Click here

  6. INSTALL NO. 1 GLOVE COMPARTMENT PANEL

    Click here

  7. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  8. INSTALL FRONT DOOR NO. 2 OPENING TRIM COVER LH

    Click here

  9. INSTALL FRONT DOOR OPENING TRIM COVER LH

    Click here

  10. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here