WIPER SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

PROCEDURE


  1. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS

    Click here

  2. REMOVE LOWER STEERING COLUMN COVER SUB-ASSEMBLY


    1. B000Q1K

      Turn the steering wheel assembly 90° to the right from the straight condition and remove the screw shown in the illustration.

    2. B000QVM

      Turn the steering wheel assembly 90° to the left from the straight condition and remove the screw shown in the illustration.

    3. B000PV5

      Remove the screw.

    4. B000S3T

      Press the part in the direction of the arrow shown in the illustration to detach the claw.

    5. B000TA7

      Press the part in the direction of the arrow shown in the illustration to detach the claw.

    6. B000RXN

      Detach the claws.

    7. B000PP7C01
      B004B1M Remove in this Direction

      Pull the lower steering column cover sub-assembly in the direction of the arrow shown in the illustration to remove, taking care not to catch the tilt and telescopic switch.

  3. REMOVE UPPER STEERING COLUMN COVER


    1. B000OKN

      Detach the clips and disconnect the upper steering column cover from the meter hood spacer.

    2. B000S0W

      Detach the claw and remove the upper steering column cover.

  4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B000PG3C01
      B004CNL Remove in this Direction

      Using a screwdriver, detach the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note

      Pressing forcefully will damage the claw.