LUGGAGE DOOR LOCK CONTROL CABLE ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY


    1. B000SRP

      Attach the clamp.

    2. B000SHH

      w/ Release Lever:

      Attach the clamp.

    3. B000THX

      Draw the cable end of luggage door lock control cable sub-assembly into the inside of vehicle from the luggage room left side.

    4. Attach the clamps.

    5. B000QYCC05
      *a Cable Clamp
      *b Clamp

      Attach the clamp and cable clamps to install the luggage door lock control cable sub-assembly.

    6. B004A4G

      Put back the room partition panel insulator.

  2. INSTALL LUGGAGE DOOR LOCK OPENER ASSEMBLY


    1. B000R0PC03
      B004B1M Clockwise Direction

      Attach the cable end to the luggage door lock opener assembly.

    2. Turn clockwise and attach the cable clamp for the luggage door lock opener assembly.

    3. B000QLE

      Install the luggage door lock opener assembly with the 2 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. INSTALL REAR SEAT ASSEMBLY

    Click here

  4. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

    Click here

  5. INSTALL BACK DOOR LOCK PROTECTOR

    Click here

  6. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

  8. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  9. INSTALL LUGGAGE COMPARTMENT TRIM BOX

    Click here

  10. INSTALL REAR FLOOR FINISH PLATE

    Click here

  11. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  12. INSTALL NO. 2 DECK BOARD

    Click here

  13. INSTALL NO. 1 DECK BOARD

    Click here