LUGGAGE COMPARTMENT DOOR DISASSEMBLY

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during luggage compartment door disassembly/reassembly are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Television camera assembly (Only for removal and installation) Television camera assembly optical axis (Back camera position setting) Parking assist monitor system

Click here

Television camera assembly Parking assist monitor system initialization
Active rear wing assembly (Including removal and installation) Active rear wing Active rear wing system

Click here

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. B004CSVC02
      *a Protective Tape
      B004B1M Open in this Direction

      Using a screwdriver, detach the claws of the cover in the direction indicated by the arrow in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. B000QQU

      Remove the 2 screws and luggage compartment door assist grip.

  2. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    1. B000O59

      Using a clip remover, detach the 10 clips and remove the luggage compartment door cover.

  3. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM BRACKET


    1. B000Q57

      Remove the 3 screws and No. 1 luggage compartment trim bracket.

  4. REMOVE OUTER LOWER LUGGAGE COMPARTMENT DOOR PANEL

    Click here

  5. REMOVE ACTIVE REAR WING (w/ Active Rear Wing)

    Click here

  6. REMOVE TELEVISION CAMERA ASSEMBLY

    Click here

  7. REMOVE LUGGAGE COMPARTMENT DOOR HOUSING

    Tech Tips

    When removing the luggage compartment door housing, heat the luggage compartment door housing using a heat light.

    Standard
    Item Temperature
    Luggage Compartment Door Housing 20 to 30°C (68 to 86°F)

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004AM0C23
    *a Heated Part
    *b Heat Light

    1. B004AVKC01
      B004CG0 Double-sided Tape

      Detach the adhesional surface of the double-sided tape.

    2. Remove the luggage compartment door housing.

    3. Clean the luggage compartment door.

  8. REMOVE LUGGAGE DOOR LOCK PROTECTOR

    Click here

  9. REMOVE LUGGAGE COMPARTMENT DOOR STRIKER ASSEMBLY

    Click here

  10. REMOVE NO. 1 DECK BOARD


    1. B004B9BC01
      *1 Strap
      B004B1M Remove in this Direction

      Lift up the strap and remove the No. 1 deck board.

  11. REMOVE NO. 2 DECK BOARD


    1. B004CKZC01
      *1 Strap
      B004B1M Remove in this Direction

      Lift up the strap and remove the No. 2 deck board.

  12. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH


    1. B004CN1C01
      B004B1M Open in this Direction

      Detach the claws and open the rope hook assembly caps.

    2. B004C6H

      Remove the 2 bolts and 2 rope hook assemblies.

    3. B004AQ9C01
      B0049X5 Place hand here
      B004B1M Remove in this Direction

      Pull the entire luggage compartment trim cover LH to the rear while bending inward (in the direction of the arrow) to remove it.

  13. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH


    1. B004BUEC02
      *1 Strap
      B004B1M Remove in this Direction

      Detach the claw and lift up the strap, remove the luggage compartment trim cover RH.

  14. REMOVE SIDE TRIM BOX


    1. B004AK4C01
      B004B1M Open in this Direction

      Detach the claws and open the rope hook assembly cap.

    2. B000TNW

      Remove the bolt and rope hook assembly.

    3. B004AKOC01
      B004B1M Remove in this Direction

      Detach the claw and clips.

    4. Detach the guide and remove the side trim box.

  15. REMOVE REAR FLOOR FINISH PLATE


    1. B000RQG

      Using a clip remover, remove the 3 clips.

    2. B004AS1C01
      B004B1M Remove in this Direction

      Detach the clips and guides and remove the rear floor finish plate.

  16. REMOVE LUGGAGE COMPARTMENT TRIM BOX


    1. B004B42C01
      B004B1M Remove in this Direction

      Remove the luggage compartment trim box as shown in the illustration.

  17. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  18. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. B000T35

      Remove the 2 clips.

    2. B004BZLC02
      B004ANI Push
      B004B1M Remove in this Direction

      Push the lever and remove the rope hook.

      Tech Tips

      Use the same procedure for the opposite side.

    3. B000RSE

      Remove the 2 clips.

    4. B0049TGC01
      B004B1M Remove in this Direction

      Detach the guides as shown in the illustration.

    5. B004C8FC01
      B004B1M Remove in this Direction

      Remove the entire front luggage compartment trim cover while bending it inward (in the direction of the arrow).

  19. REMOVE INNER LUGGAGE COMPARTMENT TRIM COVER LH


    1. B000POC

      Remove the 4 clips.

    2. B004AJ2C01
      B004B1M Remove in this Direction

      Remove the entire inner luggage compartment trim cover LH while bending it inward (in the direction of the arrow).

  20. REMOVE INNER LUGGAGE COMPARTMENT TRIM COVER RH


    1. B004C07C01
      B004B1M Open in this Direction

      Detach the claws and open the rope hook assembly cap.

    2. B000SYA

      Remove the bolt and rope hook assembly.

    3. B000RM6

      Remove the 4 clips and inner luggage compartment trim cover RH.

  21. REMOVE NO. 4 LUGGAGE ROOM WIRE


    1. B004CJKN01

      Detach the clamps.

    2. Detach the claws to the grommet.

    3. B004CHXN01

      Detach the claws and remove the wire harness grommet from the vehicle body.

    4. B000Q3F

      Detach the clamps and remove the No. 4 luggage room wire.

    5. Disconnect the connector.

  22. REMOVE WIRE HARNESS GROMMET


    1. B000PPG

      Detach the claws and remove the wire harness grommet.