HOOD SUPPORT DISPOSAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. DISPOSE OF HOOD SUPPORT ASSEMBLY LH

    Note

    Make sure the piston rods are in the fully extended stake before performing work.


    1. Horizontally hold the hood support assembly LH in a vise with the piston rod pulled out.

    2. B000TFRN01

      Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw to release the gas.

      Area Measurement
      A-B 10 mm (0.394 in.)

      CAUTION:

      Always use proper safety equipment and be careful when drilling because shards of metal may fly about.

      B000SQQ

      Tech Tips

      The gas is colorless, odorless and non-poisonous.