LUGGAGE COMPARTMENT DOOR OPENER INNER SWITCH INSPECTION

PROCEDURE

1. INSPECT LUGGAGE COMPARTMENT DOOR OPENER INNER SWITCH (NO. 3 COMBINATION SWITCH ASSEMBLY) (for LHD)

   
   

   1. Remove the luggage compartment door opener inner switch (No. 3 combination switch assembly).

      Click here

   2. 

      *a	Component without harness connected (Luggage Compartment Door Opener Inner Switch (No. 3 Combination Switch Assembly))

      Check the resistance.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 3(B) - 13(L) Luggage Compartment Opening Switch OFF 10 kΩ or higher Luggage Compartment Opening Switch ON Below 1 Ω

         If the result is not as specified, replace the luggage compartment door opener inner switch (No. 3 combination switch assembly).

   3. Check that the switch illuminates.

      
      

      1. Apply auxiliary battery voltage to the No. 3 combination switch assembly and check that the LED illuminates.

         OK
         Measurement Condition Specified Condition Auxiliary battery positive (+) → 7 (ILL+) Auxiliary battery negative (-) → 12 (ILL-) LED illuminates

         If the result is not as specified, replace the luggage compartment door opener inner switch (No. 3 combination switch assembly).

   4. Install the luggage compartment door opener inner switch (No. 3 combination switch assembly).

      Click here

2. INSPECT LUGGAGE COMPARTMENT DOOR OPENER INNER SWITCH (NO. 3 COMBINATION SWITCH ASSEMBLY) (for RHD)

   
   

   1. Remove the luggage compartment door opener inner switch (No. 3 combination switch assembly).

      Click here

   2. 

      *a	Component without harness connected (Luggage Compartment Door Opener Inner Switch (No. 3 Combination Switch Assembly))

      Check the resistance.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 6(B) - 16(L) Luggage Compartment Opening Switch OFF 10 kΩ or higher Luggage Compartment Opening Switch ON Below 1 Ω

         If the result is not as specified, replace the luggage compartment door opener inner switch (No. 3 combination switch assembly).

   3. Check that the switch illuminates.

      
      

      1. Apply auxiliary battery voltage to the No. 3 combination switch assembly and check that the LED illuminates.

         OK
         Measurement Condition Specified Condition Auxiliary battery positive (+) → 7 (ILL+) Auxiliary battery negative (-) → 12 (ILL-) LED illuminates

         If the result is not as specified, replace the luggage compartment door opener inner switch (No. 3 combination switch assembly).

   4. Install the luggage compartment door opener inner switch (No. 3 combination switch assembly).

      Click here