LUGGAGE COMPARTMENT DOOR REASSEMBLY

PROCEDURE


  1. INSTALL WIRE HARNESS GROMMET


    1. B000PPG

      Attach the claws to install the grommet.

  2. INSTALL NO. 4 LUGGAGE ROOM WIRE


    1. B000Q3F

      Pass the No. 4 luggage room wire through the wire harness grommet and insert it into the inside of the luggage room.

    2. Attach the clamps and connect the connector.

    3. B004CHXN04

      Attach the claws to install the grommet.

    4. B004CJKN05

      Attach the clamps and claws to install the No. 4 luggage room wire.

  3. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER LH


    1. B000Q6R

      Install the inner luggage compartment trim cover LH with the 4 clips.

  4. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER RH


    1. B000QB1

      Install the inner luggage compartment trim cover RH with the 4 clips.

    2. B004AILC01
      B004B1M Close in this Direction
      B004ANI Bolt

      Install the rope hook assembly with the bolt.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    3. Close the rope hook assembly cap as shown in the illustration to attach the claws.

  5. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. B004CQ8C01
      B004B1M Install in this Direction

      Insert the guides as shown in the illustration.

    2. B000RSE

      Install the front luggage compartment trim cover with the 2 clips.

    3. B004AWSC02
      B004B1M Install in this Direction
      B004ANI Push

      Install the rope hook as shown as the illustration.

      Tech Tips

      Use the same procedure for the opposite side.

    4. B000T35

      Install the 2 clips.

  6. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  7. INSTALL LUGGAGE COMPARTMENT TRIM BOX


    1. Install the luggage compartment trim box.

  8. INSTALL REAR FLOOR FINISH PLATE


    1. B004ATIC01
      B004B1M Install in this Direction

      Insert the guides as shown in the illustration.

    2. Attach the clips.

    3. B000RQG

      Install the rear floor finish plate with the 3 clips.

  9. INSTALL SIDE TRIM BOX


    1. B004A12C01
      B004B1M Install in this Direction

      Insert the guide as shown in the illustration.

    2. Attach the clips and claw to install the side trim box.

    3. B004BLVC01
      B004B1M Close in this Direction
      B004ANI Bolt

      Install the rope hook assembly with the bolt.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    4. Close the rope hook assembly cap as shown in the illustration to attach the claws.

  10. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH


    1. B004BHDC01
      B004B1M Install in this Direction

      Install the luggage compartment trim cover LH.

    2. B004C9KC01
      B004B1M Close in this Direction
      B004ANI Bolt

      Install the 2 rope hook assemblies with the 2 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    3. Close the rope hook assembly caps as shown in the illustration to attach the claws.

  11. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH


    1. B004ATJC01
      B004B1M Install in this Direction

      Attach the claw to install the luggage compartment trim cover RH.

  12. INSTALL NO. 2 DECK BOARD


    1. B004A8KC01
      B004B1M Install in this Direction

      Install the No. 2 deck board.

  13. INSTALL NO. 1 DECK BOARD


    1. B004A2TC01
      B004B1M Install in this Direction

      Install the No. 1 deck board.

  14. INSTALL LUGGAGE COMPARTMENT DOOR STRIKER ASSEMBLY

    Click here

  15. INSTALL LUGGAGE DOOR LOCK PROTECTOR

    Click here

  16. INSTALL LUGGAGE COMPARTMENT DOOR HOUSING

    Tech Tips

    When installing the luggage compartment door housing, heat the luggage compartment door panel and luggage compartment door housing using a heat light.

    Standard
    Item Temperature
    Luggage Compartment Door Panel 40 to 60°C (104 to 140°F)
    Luggage Compartment Door Housing 20 to 30°C (68 to 86°F)

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004AM0C23
    *a Heated Part
    *b Heat Light

    1. Clean the luggage compartment door panel surface.


      1. Using a heat light, heat the luggage compartment door panel surface.

      2. Remove the double-sided tape from the luggage compartment door panel.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Remove the peeling paper from the face of a new luggage compartment door housing.

      Tech Tips

      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. B004CV6C01
      B004CG0 Double-sided Tape

      Attach the double-sided tape to install the luggage compartment door housing.

      Tech Tips

      Press the luggage compartment door housing firmly to install it.

  17. INSTALL TELEVISION CAMERA ASSEMBLY

    Click here

  18. INSTALL ACTIVE REAR WING (w/ Active Rear Wing)

    Click here

  19. INSTALL OUTER LOWER LUGGAGE COMPARTMENT DOOR PANEL

    Click here

  20. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM BRACKET


    1. B000Q57

      Install the No. 1 luggage compartment trim bracket with the 3 screws.

  21. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. B000O59

      Install the luggage compartment door cover with the 10 clips.

  22. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. B000QQU

      Install the luggage compartment door assist grip with the 2 screws.

    2. Close the cover.

  23. ADJUST REAR TELEVISION CAMERA ASSEMBLY OPTICAL AXIS

    Click here

  24. INITIALIZE ACTIVE REAR WING SYSTEM (w/ Active Rear Wing)

    Click here

  25. CHECK ACTIVE REAR WING SYSTEM (w/ Active Rear Wing)

    Click here