AIR CONDITIONING PANEL INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. B004BD2

      Connect the 3 connectors.

    2. Attach the clamp.

    3. B004B1G

      Attach the claw and clip to install the integration control and panel assembly.

  2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    Click here

  4. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. B004CCRC01
      B0049X5 Place Hands Here
      B004B1M Install in this Direction (1)
      B004CNL Install in this Direction (2)

      Move the upper console panel sub-assembly to the installation position diagonally at a slightly slanted angle from the rear upper of the vehicle.

      Note

      Hold the areas shown in the illustration, lift the upper console panel sub-assembly and while inserting a portion of the claw into the mating hole move it to the installation position.

    2. B004BQZ

      Attach the claw.

    3. B004BU1

      Attach the claw.

    4. B004CC8C01
      B004B1M Install in this Direction

      Slide toward the front of the vehicle to insert the guide and attach the clip and claw.

    5. B004A7D

      Fold the front seatback (RH side) forward and attach the clip and claw.

    6. B004BFW

      Return the seatback to the original position and install the bolt.

    7. B004AF5C01
      B004C4F Bolt
      B004ANI Screw

      Install the upper console panel sub-assembly with the 2 bolts and 2 screws.

  6. INSTALL BOX PANEL SUB-ASSEMBLY


    1. B004CIWC01
      B004B1M Install in this Direction

      Slide toward the box panel sub-assembly front of the vehicle and attach the guide.

    2. B0049YX

      Attach the clip.

    3. B004B6H

      Attach the clip.

    4. B004A81C01
      B004C4F Bolt
      B004ANI Screw

      Install the box panel sub-assembly with the 3 bolts and 2 screws.

  7. INSTALL NO. 1 GLOVE COMPARTMENT PANEL

    Click here

  8. INSTALL UPPER CONSOLE BOX

    Click here

  9. INSTALL SHIFTING HOLE COVER ASSEMBLY

    Click here

  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  11. INSTALL RADIO REMOTE TUNING SWITCH ASSEMBLY

    Click here

  12. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  13. INSTALL FRONT DOOR NO. 2 OPENING TRIM COVER LH

    Click here

  14. INSTALL FRONT DOOR OPENING TRIM COVER LH

    Click here

  15. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here