AIR CONDITIONING PRESSURE SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    for HFC-134a(R134a):

    Click here

    for HFO-1234yf(R1234yf):

    Click here

  2. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  3. REMOVE HOOD LOCK ASSEMBLY (for LHD)

    Click here

  4. REMOVE HOOD LOCK ASSEMBLY (for RHD)


    1. B000T03

      Disconnect the connector.

    2. Remove the 3 bolts and hold the hood lock assembly at the backside of the front bumper.

  5. REMOVE LOW PITCHED HORN ASSEMBLY

    Click here

  6. REMOVE LOWER ARM BRACKET BRACE SUB-ASSEMBLY LH

    Click here

  7. REMOVE AIR CONDITIONER PRESSURE SENSOR


    1. B000RX1C01
      B004C4F No. 2 Cooler Cover
      B004ANI Connector
      B004CG0 Tape

      Remove the tape.

    2. Disconnect the connector.

    3. Remove the No. 2 cooler cover.

    4. B000PSBC01
      *a Turn
      *b Hold
      B004B1M Remove in this Direction

      Using a 27 mm deep socket wrench, remove the air conditioner pressure sensor from the liquid tube sub-assembly A.

      Note


      • Do not apply excessive force to the liquid tube sub-assembly A.

      • Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.