FRONT BLOWER MOTOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. B004AZTC01
      *1 Heater Packing

      When reusing the blower motor with fan sub-assembly:


      1. Install a new heater packing to the blower motor with fan sub-assembly.

    2. B004BVYC01
      B004B1M Insert in this Direction

      Insert the blower motor with fan sub-assembly.

      Note

      Make sure there is no interference with the fan as it will impact the cooling performance.

    3. B004BLDC01
      B004C4F Screw
      B004ANI Connector

      Install the blower motor with fan sub-assembly with the 3 screws.

    4. Connect the connector.

    5. Attach the clamp.

  2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here