BLOWER UNIT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    Note

    Make sure to perform initialization after replacing the No. 1 blower damper servo sub-assembly. If initialization is not performed, the air conditioning unit assembly will not perform properly as the air conditioning amplifier assembly will not be able to recognize the position of the No. 1 blower damper servo sub-assembly.

  2. REMOVE AIR CONDITIONER UNIT ASSEMBLY

    Click here

  3. REMOVE BLOWER ASSEMBLY


    1. B000OHZ

      Disconnect the connector.

    2. Remove the air conditioning harness assembly from the guide.

    3. B000RAZ

      Disconnect the drain cooler hose (for connector).

    4. B000T0W

      Remove the screw.

    5. Detach the claw, pull out the guide pin and remove the blower assembly.