FRONT AIR CONDITIONING UNIT COMPONENTS
ILLUSTRATION
| *1 | NO. 2 DECK BOARD | *2 | NEGATIVE AUXILIARY BATTERY TERMINAL |
 |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | - | - |
ILLUSTRATION
| *1 | NO. 1 ENGINE UNDER COVER ASSEMBLY | *2 | NO. 2 ENGINE UNDER COVER ASSEMBLY |
| *3 | V-BANK COVER SUB-ASSEMBLY | *4 | ENGINE ROOM SIDE COVER LH |
| *5 | LOWER RADIATOR AIR DEFLECTOR | *6 | RADIATOR SUPPORT TO FRAME SEAL RH |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| ★ | Precoated part | - | - |
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | COOLER PIPE GROMMET | *2 | COOLER REFRIGERANT LIQUID PIPE A |
| *3 | FENDER APRON BRACE SUB-ASSEMBLY RH | *4 | GENERATOR CABLE |
| *5 | HEATER PIPE GROMMET | *6 | HEATER WATER HOSE INLET |
| *7 | HEATER WATER HOSE OUTLET | *8 | INVERTER MOTOR CABLE BRACKET ASSEMBLY |
| *9 | INVERTER TERMINAL COVER | *10 | MOTOR CABLE |
| *11 | SUCTION TUBE SUB-ASSEMBLY B | *12 | CONNECTOR COVER ASSMBLY |
| *13 | HOLE PLUG | *14 | O-RING |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part |  |
Compressor oil ND-OIL 11 or equivalent |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | COOLER PIPE GROMMET | *2 | COOLER REFRIGERANT LIQUID PIPE A |
| *3 | FENDER APRON BRACE SUB-ASSEMBLY RH | *4 | GENERATOR CABLE |
| *5 | HEATER PIPE GROMMET | *6 | HEATER WATER HOSE INLET |
| *7 | HEATER WATER HOSE OUTLET | *8 | INVERTER TERMINAL COVER |
| *9 | MOTOR CABLE | *10 | SUCTION TUBE SUB-ASSEMBLY B |
| *11 | CONNECTOR COVER ASSMBLY | *12 | HOLE PLUG |
| *13 | O-RING | - | - |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part | |
Compressor oil ND-OIL 11 or equivalent |
ILLUSTRATION
| *1 | ACCELERATOR PEDAL | *2 | FRONT FLOOR CARPET ASSEMBLY LH |
| *3 | FRONT FLOOR CARPET ASSEMBLY RH | *4 | NO. 1 SIDE TRIM BRACKET |
| *5 | ACCELERATOR PEDAL PAD | *6 | FRONT FLOOR CAUTION PLATE COVER |
| *7 | BLACK CLIP | *8 | LIGHT GRAY CLIP |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | - | - |
ILLUSTRATION
| *A | for LHD | *B | for RHD |
| *C | w/o PTC Heater | *D | w/ PTC Heater |
| *E | w/ VGRS | *F | w/ Headup Display |
| *1 | DRIVER SIDE JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU | *2 | DRIVING SUPPORT ECU ASSEMBLY |
| *3 | FRONT STEERING CONTROL ECU | *4 | HEADUP DISPLAY |
| *5 | HYBRID VEHICLE CONTROL ECU ASSEMBLY | *6 | NO. 1 AIR DUCT |
| *7 | NO. 2 AIR DUCT | *8 | NO. 2 SEMICONDUCTOR POWER INTEGRATION ECU |
| *9 | PASSENGER SIDE JUNCTION BLOCK ASSEMBLY WITH NETWORK GATEWAY ECU | *10 | SEMICONDUCTOR POWER INTEGRATION ECU |
| *11 | SHIFT CONTROL ECU | *12 | WIRING HARNESS CLAMP BRACKET |
| *13 | ION GENERATOR WITH BRACKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY | *2 | NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY |
| *3 | NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY | *4 | NO. 5 HEATER TO REGISTER DUCT |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for LHD | *B | for RHD |
| *1 | INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT ASSEMBLY | *2 | LOWER DEFROSTER NOZZLE ASSEMBLY |
| *3 | NO. 1 SIDE DEFROSTER NOZZLE DUCT | *4 | NO. 2 SIDE DEFROSTER NOZZLE DUCT |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
ILLUSTRATION
| *1 | AIR CONDITIONING AMPLIFIER ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | AIR CONDITIONER UNIT ASSEMBLY | *2 | INSTRUMENT PANEL REINFORCEMENT ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | ASPIRATOR | *2 | COOLER THERMISTOR (ROOM TEMPERATURE SENSOR) |
| *3 | DRAIN COOLER HOSE (for Connector) | *4 | DRAIN COOLER HOSE (for Driver's Side) |
| *5 | DRAIN COOLER HOSE (for Front Passenger Side) | *6 | PACKING |
| *7 | AIR CONDITIONING RADIATOR | - | - |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | for LHD | *B | for RHD |
| *C | w/o PTC Heater | *D | w/ PTC Heater |
| *1 | AIR CONDITIONING HARNESS ASSEMBLY | *2 | AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY |
| *3 | COOLER EXPANSION VALVE | *4 | COOLING UNIT PARTS |
| *5 | HEATER BRACKET | *6 | HEATER COVER |
| *7 | HEATER GROMMET | *8 | HEATER RADIATOR UNIT SUB-ASSEMBLY |
| *9 | NO. 1 COOLER COVER | *10 | NO. 2 COOLER COVER |
| *11 | QUICK HEATER ASSEMBLY | *12 | HEATER CLAMP |
| *13 | BRACKET | *14 | O-RING |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Compressor oil ND-OIL 11 or equivalent | - | - |
ILLUSTRATION
| *A | for LHD | *B | for RHD |
| *1 | NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY | *2 | NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
| *3 | NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY | *4 | NO. 4 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
| *5 | BRACKET | *6 | GEAR |
ILLUSTRATION
| *A | for LHD | *B | for RHD |
| *1 | BRACKET | *2 | NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
| *3 | NO. 1 COOLER THERMISTOR | *4 | HEATER CASE (for Front Side) |
| *5 | HEATER CASE (for Rear Side) | *6 | O-RING |
| ● | Non-reusable part | |
Compressor oil ND-OIL 11 or equivalent |