REAR SEAT OUTER BELT ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

   
   
   1. 

      *a	Unlock
      *b	Lock
      *c	45°

      Before installing the rear No. 1 seat outer belt assembly LH, check the ELR function.

      Note

      Do not disassemble the retractor.

      
      

      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

         If the result is not as specified, replace the rear No. 1 seat outer belt assembly LH.

2. INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY RH

   
   
   1. 

      *a	Unlock
      *b	Lock
      *c	45°

      Before installing the rear No. 1 seat outer belt assembly RH, check the ELR function.

      Note

      Do not disassemble the retractor.

      
      

      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

         If the result is not as specified, replace the rear No. 1 seat outer belt assembly RH.