POWER SEAT SWITCH INSPECTION

PROCEDURE

1. INSPECT FRONT POWER SEAT SWITCH LH (for Standard Seat Type)

   
   
   1. 

      *a	Slide and Front Vertical Switch
      *b	Slide and Lifter Switch
      *c	Reclining Switch
      *d	Headrest Switch
      *e	Lumbar Support Switch
      *f	Component without harness connected (Front Power Seat Switch LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Slide Switch
      Tester Connection Switch Condition Specified Condition 7 (SLDF) - 20 (E) Front Below 50 Ω 6 (SLDR) - 20 (E) Rear
      Front Vertical Switch
      Tester Connection Switch Condition Specified Condition 4 (FUP) - 20 (E) Up Below 50 Ω 5 (FDWN) - 20 (E) Down
      Lifter Switch
      Tester Connection Switch Condition Specified Condition 3 (LUP) - 20 (E) Up Below 50 Ω 8 (LDWN) - 20 (E) Down
      Reclining Switch
      Tester Connection Switch Condition Specified Condition 2 (RCLF) - 20 (E) Front Below 50 Ω 1 (RCLR) - 20 (E) Rear
      Headrest Switch
      Tester Connection Switch Condition Specified Condition 15 (HUP) - 20 (E) Up Below 50 Ω 16 (HDWN) - 20 (E) Down
      Lumbar Support Switch
      Tester Connection Switch Condition Specified Condition 14 (H) - 20 (E) Hold Below 1 Ω 17 (R) - 20 (E) Release If the result is not as specified, replace the front power seat switch LH.

2. INSPECT FRONT POWER SEAT SWITCH LH (for Sports Seat Type)

   
   
   1. 

      *a	Slide and Front Vertical Switch
      *b	Slide and Lifter Switch
      *c	Reclining Switch
      *d	Lumbar Support Switch
      *e	Component without harness connected (Front Power Seat Switch LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Slide Switch
      Tester Connection Switch Condition Specified Condition 7 (SLDF) - 20 (E) Front Below 50 Ω 6 (SLDR) - 20 (E) Rear
      Front Vertical Switch
      Tester Connection Switch Condition Specified Condition 4 (FUP) - 20 (E) Up Below 50 Ω 5 (FDWN) - 20 (E) Down
      Lifter Switch
      Tester Connection Switch Condition Specified Condition 3 (LUP) - 20 (E) Up Below 50 Ω 8 (LDWN) - 20 (E) Down
      Reclining Switch
      Tester Connection Switch Condition Specified Condition 2 (RCLF) - 20 (E) Front Below 50 Ω 1 (RCLR) - 20 (E) Rear
      Lumbar Support Switch
      Tester Connection Switch Condition Specified Condition 14 (H) - 20 (E) Hold Below 1 Ω 17 (R) - 20 (E) Release If the result is not as specified, replace the front power seat switch LH.

3. INSPECT FRONT POWER SEAT SWITCH RH (for Standard Seat Type)

   
   
   1. 

      *a	Slide and Front Vertical Switch
      *b	Slide and Lifter Switch
      *c	Reclining Switch
      *d	Headrest Switch
      *e	Lumbar Support Switch
      *f	Component without harness connected (Front Power Seat Switch RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Slide Switch
      Tester Connection Switch Condition Specified Condition 4 (SLDF) - 11 (E) Front Below 50 Ω 5 (SLDR) - 11 (E) Rear
      Front Vertical Switch
      Tester Connection Switch Condition Specified Condition 7 (FUP) - 11 (E) Up Below 50 Ω 6 (FDWN) - 11 (E) Down
      Lifter Switch
      Tester Connection Switch Condition Specified Condition 8 (LUP) - 11 (E) Up Below 50 Ω 3 (LDWN) - 11 (E) Down
      Reclining Switch
      Tester Connection Switch Condition Specified Condition 9 (RCLF) - 11 (E) Front Below 50 Ω 10 (RCLR) - 11 (E) Rear
      Headrest Switch
      Tester Connection Switch Condition Specified Condition 16 (HUP) - 11 (E) Up Below 50 Ω 15 (HDWN) - 11 (E) Down
      Lumbar Support Switch
      Tester Connection Switch Condition Specified Condition 17 (H) - 11 (E) Hold Below 1 Ω 14 (R) - 11 (E) Release If the result is not as specified, replace the front power seat switch RH.

4. INSPECT FRONT POWER SEAT SWITCH RH (for Sports Seat Type)

   
   
   1. 

      *a	Slide and Front Vertical Switch
      *b	Slide and Lifter Switch
      *c	Reclining Switch
      *d	Lumbar Support Switch
      *e	Component without harness connected (Front Power Seat Switch RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Slide Switch
      Tester Connection Switch Condition Specified Condition 4 (SLDF) - 11 (E) Front Below 50 Ω 5 (SLDR) - 11 (E) Rear
      Front Vertical Switch
      Tester Connection Switch Condition Specified Condition 7 (FUP) - 11 (E) Up Below 50 Ω 6 (FDWN) - 11 (E) Down
      Lifter Switch
      Tester Connection Switch Condition Specified Condition 8 (LUP) - 11 (E) Up Below 50 Ω 3 (LDWN) - 11 (E) Down
      Reclining Switch
      Tester Connection Switch Condition Specified Condition 9 (RCLF) - 11 (E) Front Below 50 Ω 10 (RCLR) - 11 (E) Rear
      Lumbar Support Switch
      Tester Connection Switch Condition Specified Condition 17 (H) - 11 (E) Hold Below 1 Ω 14 (R) - 11 (E) Release If the result is not as specified, replace the front power seat switch RH.