REAR SEAT ASSEMBLY DISASSEMBLY

PROCEDURE


  1. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH


    1. B000RG0

      Remove the 18 hog rings.

    2. Using a thin-bladed screwdriver, detach the hooks and remove the separate type rear seatback cover LH from the separate type rear seatback pad LH.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

      B000OG7C01
      B004CG0 Protective Tape - -

  2. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE SEAT COVER WIRE

    Tech Tips

    Use the same procedure for the other side.


    1. B000PSP

      Remove the 4 seat cover wires.

  4. REMOVE REAR SEAT CUSHION PAD LH


    1. B000QYN

      Remove the rear seat cushion pad LH from the bench type rear seat cushion pad.

      Note

      Do not reuse the rear seat cushion pad LH after removing it.

  5. REMOVE REAR SEAT CUSHION PAD RH


    1. B000NW1

      Remove the rear seat cushion pad RH from the bench type rear seat cushion pad.

      Note

      Do not reuse the rear seat cushion pad RH after removing it.

  6. REMOVE BENCH TYPE REAR SEAT CUSHION COVER


    1. Remove the 40 hog rings.

      B000R7U
    2. B000T8UC02
      B004B1M Remove in this Direction

      Pass the 2 pieces of strap through to the front side via the hole in the seat cushion pad as shown in the illustration.

    3. Using a thin-bladed screwdriver, detach the hooks and remove the bench type rear seat cushion cover from the bench type rear seat cushion pad.

      Tech Tips

      Tape the thin-bladed screwdriver tip before use.

      B000NY1C02
      B004CG0 Protective Tape - -

  7. REMOVE SEAT COVER WIRE

    Tech Tips

    Use the same procedure for the other side.


    1. B000NUN

      Remove the 8 seat cover wires.