AIRBAG CUT-OFF SWITCH INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY

   
   

   1. 

      Install in this Direction

      Attach the claws to install the airbag cut off switch cylinder sub-assembly.

2. INSTALL NO. 2 GLOVE COMPARTMENT PANEL

   Click here

3. INSTALL FRONT DOOR NO. 2 OPENING TRIM COVER RH

   Click here

4. INSTALL FRONT DOOR OPENING TRIM COVER RH

   Tech Tips

   Use the same procedure for the LH side.

   Click here

5. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure for the LH side.

   Click here

6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

7. INSTALL NO. 2 DECK BOARD

   Click here

8. PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here

9. CHECK SRS WARNING LIGHT

   Click here