POP UP HOOD SENSOR ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the pedestrian detection chamber assembly.

PROCEDURE


  1. INSPECT PEDESTRIAN DETECTION CHAMBER ASSEMBLY (for Vehicle not Involved in Collision)


    1. Perform a diagnostic system check.

      Click here

  2. INSPECT PEDESTRIAN DETECTION CHAMBER ASSEMBLY (for Vehicle Involved in Collision and Pop Up Hood Lifter not Deployed)


    1. Perform a diagnostic system check.

      Click here

    2. Visually check the pedestrian detection chamber assembly for defects if the front bumper of the vehicle or the area around the bumper is damaged.

      Tech Tips

      The defects are as follows:


      • Cracks on the sensor housing

      • Dents on the sensor housing

      • Chips on the sensor housing

      • Cracks or other damage to the connector

      • Damage to the serial number

      OK
      No defects are found.

      If any defects are found, replace the pedestrian detection chamber assembly with a new one.

  3. INSPECT PEDESTRIAN DETECTION CHAMBER ASSEMBLY (for Vehicle Involved in Collision and Pop Up Hood Lifter is Deployed)


    1. When a pop up hood lifter has deployed as the result of a collision, be sure to replace all pedestrian detection chamber assembly.