FRONT POWER SEAT CONTROL SYSTEM TERMINALS OF ECU

for LHD:

1. Disconnect the w10 and w12 position control ECU assembly LH connectors.

2. Measure the voltage and resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   w10-2 (GND) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω
   w10-3 (+B) - Body ground	W - Body ground	Auxiliary battery power supply	Power switch off	11 to 14 V
   w12-1 (IG) - Body ground	P - Body ground	Ignition power supply	Power switch off	Below 1 V
   			Power switch on (IG)	11 to 14 V
   w12-15 (SYSB) - Body ground	G - Body ground	System power source	Power switch off	11 to 14 V
   w12-27 (DBCL) - Body ground	B - Body ground	Driver seat belt buckle switch signal	Driver seat belt unfastened	10 kΩ or higher
   			Driver seat belt fastened	Below 1 Ω
   w12-28 (DRDC) - Body ground	L - Body ground	Driver seat belt tension reducer signal	Power switch on (IG)	11 to 14 V

3. Reconnect the w10 and w12 position control ECU assembly LH connectors.

4. Measure the voltage and resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   w10-1 (SLD+) - Body ground	L - Body ground	Slide motor signal (forward)	Slide switch off	Below 1 V
   			Slide switch on (Forward)	11 to 14 V
   w10-4 (H+) - Body ground*	R - Body ground	Headrest motor signal (upward)	Headrest switch off	Below 1 V
   			Headrest switch on (Upward)	11 to 14 V
   w10-5 (SLD-) - Body ground	GR - Body ground	Slide motor signal (rearward)	Slide switch off	Below 1 V
   			Slide switch on (Rearward)	11 to 14 V
   w10-6 (LFT+) - Body ground	V - Body ground	Rear lifter motor signal (upward)	Rear lifter switch off	Below 1 V
   			Rear lifter switch on (Upward)	11 to 14 V
   w10-7 (FRV+) - Body ground	B - Body ground	Front vertical motor signal (upward)	Front vertical switch off	Below 1 V
   			Front vertical switch on (Upward)	11 to 14 V
   w10-9 (L+) - Body ground	V - Body ground	Lumbar support adjuster motor signal (forward)	Lumbar support adjuster switch off	Below 1 V
   			Lumbar support adjuster switch on (Forward)	11 to 14 V
   w10-10 (RCL+) - Body ground	P - Body ground	Reclining motor signal (forward)	Reclining switch off	Below 1 V
   			Reclining switch on (Forward)	11 to 14 V
   w11-2 (H-) - Body ground*	B - Body ground	Headrest motor signal (downward)	Headrest switch off	Below 1 V
   			Headrest switch on (Downward)	11 to 14 V
   w11-3 (L-) - Body ground	L - Body ground	Lumbar support adjuster motor signal (rearward)	Lumbar support adjuster switch off	Below 1 V
   			Lumbar support adjuster switch on (Rearward)	11 to 14 V
   w11-4 (FRV-) - Body ground	R - Body ground	Front vertical motor signal (downward)	Front vertical switch off	Below 1 V
   			Front vertical switch on (Downward)	11 to 14 V
   w11-5 (LFT-) - Body ground	G - Body ground	Lifter motor signal (downward)	Rear lifter switch off	Below 1 V
   			Rear lifter switch on (Downward)	11 to 14 V
   w11-6 (RCL-) - Body ground	LG - Body ground	Reclining motor signal (rearward)	Reclining switch off	Below 1 V
   			Reclining switch on (Rearward)	11 to 14 V
   w12-2 (FRLS) - Body ground	L - Body ground	Inner limit switch signal	Front seatback edge protector (inner limit switch assembly) off	Below 1 V
   			Front seatback edge protector (inner limit switch assembly) on	11 to 14 V
   w12-4 (LFLF) - Body ground	W - Body ground	Power seat switch LH (lumbar support adjuster switch (forward)) signal	Lumbar support adjuster switch off	11 to 14 V
   			Lumbar support adjuster switch on (Forward)	Below 1 V
   w12-5 (HEDU) - Body ground*	SB - Body ground	Power seat switch LH (headrest switch (upward)) signal	Headrest switch off	11 to 14 V
   			Headrest switch on (Upward)	Below 1 V
   w12-6 (FRVU) - Body ground	L - Body ground	Power seat switch LH (front vertical switch (upward)) signal	Front vertical switch off	11 to 14 V
   			Front vertical switch on (Upward)	Below 1 V
   w12-7 (LFTU) - Body ground	BR - Body ground	Power seat switch LH (rear lifter switch (upward)) signal	Rear lifter switch off	11 to 14 V
   			Rear lifter switch on (Upward)	Below 1 V
   w12-8 (RCLF) - Body ground	R - Body ground	Power seat switch LH (reclining switch (forward)) signal	Reclining switch off	11 to 14 V
   			Reclining switch on (Forward)	Below 1 V
   w12-9 (SLDF) - Body ground	B - Body ground	Power seat switch LH (slide switch (forward)) signal	Slide switch off	11 to 14 V
   			Slide switch on (Forward)	Below 1 V
   w12-10 (SSFV) - Body ground	L - Body ground	Front vertical position signal	Front vertical function operating	Pulse generation
   w12-11 (SSRR) - Body ground	V - Body ground	Lumbar support position signal	Lumbar support adjuster function operating	Pulse generation
   w12-12 (SENG) - Body ground	BR - Body ground	Sensor ground	Always	Below 1 Ω
   w12-16 (LRLS) - Body ground	P - Body ground	Outer limit switch signal	Front seatback edge protector (outer limit switch assembly) off	Below 1 V
   			Front seatback edge protector (outer limit switch assembly) on	11 to 14 V
   w12-18 (LFLR) - Body ground	L - Body ground	Power seat switch LH (lumbar support adjuster switch (rearward)) signal	Lumbar support adjuster switch off	11 to 14 V
   w12-19 (HEDD) - Body ground*	P - Body ground	Power seat switch LH (headrest switch (downward)) signal	Headrest switch off	11 to 14 V
   			Headrest switch on (Downward)	Below 1 V
   w12-20 (FRVD) - Body ground	V - Body ground	Power seat switch LH (front vertical switch (downward)) signal	Front vertical switch off	11 to 14 V
   			Front vertical switch on (Upward)	Below 1 V
   w12-21 (LFTD) - Body ground	LG - Body ground	Power seat switch LH (rear lifter switch (downward)) signal	Rear lifter switch off	11 to 14 V
   			Rear lifter switch on (Downward)	Below 1 V
   w12-22 (RCLR) - Body ground	G - Body ground	Power seat switch LH (reclining switch (rearward)) signal	Reclining switch off	11 to 14 V
   			Reclining switch on (Rearward)	Below 1 V
   w12-23 (SLDR) - Body ground	GR - Body ground	Power seat switch LH (slide switch (rearward)) signal	Slide switch off	11 to 14 V
   			Slide switch on (Rearward)	Below 1 V
   w12-24 (SSRH) - Body ground*	P - Body ground	Headrest position signal	Headrest adjuster function operating	Pulse generation
   w12-25 (SSRL) - Body ground	B - Body ground	Rear lifter position signal	Rear lifter function operating	Pulse generation
   w12-26 (SSRS) - Body ground	G - Body ground	Slide position signal	Slide function operating	Pulse generation

   
   

   • *: for Standard Seat Type

for RHD:

1. Disconnect the v10 and v12 position control ECU assembly RH connectors.

2. Measure the voltage and resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   v10-2 (GND) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω
   v10-3 (+B) - Body ground	W - Body ground	Auxiliary battery power supply	Power switch off	11 to 14 V
   v12-1 (IG) - Body ground	P - Body ground	Ignition power supply	Power switch off	Below 1 V
   			Power switch on (IG)	11 to 14 V
   v12-15 (SYSB) - Body ground	G - Body ground	System power source	Power switch off	11 to 14 V
   v12-27 (DBCL) - Body ground	B - Body ground	Driver seat belt buckle switch signal	Driver seat belt unfastened	10 kΩ or higher
   			Driver seat belt fastened	Below 1 Ω
   v12-28 (DRDC) - Body ground	L - Body ground	Driver seat belt tension reducer signal	Power switch on (IG)	11 to 14 V

3. Reconnect the v10 and v12 position control ECU assembly RH connectors.

4. Measure the voltage and resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   v10-1 (SLD+) - Body ground	L - Body ground	Slide motor signal (forward)	Slide switch off	Below 1 V
   			Slide switch on (Forward)	11 to 14 V
   v10-4 (H+) - Body ground*	R - Body ground	Headrest motor signal (upward)	Headrest switch off	Below 1 V
   			Headrest switch on (Upward)	11 to 14 V
   v10-5 (SLD-) - Body ground	GR - Body ground	Slide motor signal (rearward)	Slide switch off	Below 1 V
   			Slide switch on (Rearward)	11 to 14 V
   v10-6 (LFT+) - Body ground	V - Body ground	Rear lifter motor signal (upward)	Rear lifter switch off	Below 1 V
   			Rear lifter switch on (Upward)	11 to 14 V
   v10-7 (FRV+) - Body ground	B - Body ground	Front vertical motor signal (upward)	Front vertical switch off	Below 1 V
   			Front vertical switch on (Upward)	11 to 14 V
   v10-9 (L+) - Body ground	V - Body ground	Lumbar support adjuster motor signal (forward)	Lumbar support adjuster switch off	Below 1 V
   			Lumbar support adjuster switch on (Forward)	11 to 14 V
   v10-10 (RCL+) - Body ground	P - Body ground	Reclining motor signal (forward)	Reclining switch off	Below 1 V
   			Reclining switch on (Forward)	11 to 14 V
   v10-2 (H-) - Body ground*	B - Body ground	Headrest motor signal (downward)	Headrest switch off	Below 1 V
   			Headrest switch on (Downward)	11 to 14 V
   v10-3 (L-) - Body ground	L - Body ground	Lumbar support adjuster motor signal (rearward)	Lumbar support adjuster switch off	Below 1 V
   			Lumbar support adjuster switch on (Rearward)	11 to 14 V
   v10-4 (FRV-) - Body ground	R - Body ground	Front vertical motor signal (downward)	Front vertical switch off	Below 1 V
   			Front vertical switch on (Downward)	11 to 14 V
   v10-5 (LFT-) - Body ground	G - Body ground	Lifter motor signal (downward)	Rear lifter switch off	Below 1 V
   			Rear lifter switch on (Downward)	11 to 14 V
   v10-6 (RCL-) - Body ground	LG - Body ground	Reclining motor signal (rearward)	Reclining switch off	Below 1 V
   			Reclining switch on (Rearward)	11 to 14 V
   v12-2 (FRLS) - Body ground	L - Body ground	Inner limit switch signal	Front seatback edge protector (inner limit switch assembly) off	Below 1 V
   			Front seatback edge protector (inner limit switch assembly) on	11 to 14 V
   v12-4 (LFLF) - Body ground	W - Body ground	Power seat switch RH (lumbar support adjuster switch (forward)) signal	Lumbar support adjuster switch off	11 to 14 V
   			Lumbar support adjuster switch on (Forward)	Below 1 V
   v12-5 (HEDU) - Body ground*	SB - Body ground	Power seat switch RH (headrest switch (upward)) signal	Headrest switch off	11 to 14 V
   			Headrest switch on (Upward)	Below 1 V
   v12-6 (FRVU) - Body ground	L - Body ground	Power seat switch RH (front vertical switch (upward)) signal	Front vertical switch off	11 to 14 V
   			Front vertical switch on (Upward)	Below 1 V
   v12-7 (LFTU) - Body ground	BR - Body ground	Power seat switch RH (rear lifter switch (upward)) signal	Rear lifter switch off	11 to 14 V
   			Rear lifter switch on (Upward)	Below 1 V
   v12-8 (RCLF) - Body ground	R - Body ground	Power seat switch RH (reclining switch (forward)) signal	Reclining switch off	11 to 14 V
   			Reclining switch on (Forward)	Below 1 V
   v12-9 (SLDF) - Body ground	B - Body ground	Power seat switch RH (slide switch (forward)) signal	Slide switch off	11 to 14 V
   			Slide switch on (Forward)	Below 1 V
   v12-10 (SSFV) - Body ground	L - Body ground	Front vertical position signal	Front vertical function operating	Pulse generation
   v12-11 (SSRR) - Body ground	V - Body ground	Lumbar support position signal	Lumbar support adjuster function operating	Pulse generation
   v12-12 (SENG) - Body ground	BR - Body ground	Sensor ground	Always	Below 1 Ω
   v12-16 (LRLS) - Body ground	P - Body ground	Outer limit switch signal	Front seatback edge protector (outer limit switch assembly) off	Below 1 V
   			Front seatback edge protector (outer limit switch assembly) on	11 to 14 V
   v12-18 (LFLR) - Body ground	L - Body ground	Power seat switch RH (lumbar support adjuster switch (rearward)) signal	Lumbar support adjuster switch off	11 to 14 V
   v12-19 (HEDD) - Body ground*	P - Body ground	Power seat switch RH (headrest switch (downward)) signal	Headrest switch off	11 to 14 V
   			Headrest switch on (Downward)	Below 1 V
   v12-20 (FRVD) - Body ground	V - Body ground	Power seat switch RH (front vertical switch (downward)) signal	Front vertical switch off	11 to 14 V
   			Front vertical switch on (Upward)	Below 1 V
   v12-21 (LFTD) - Body ground	LG - Body ground	Power seat switch RH (rear lifter switch (downward)) signal	Rear lifter switch off	11 to 14 V
   			Rear lifter switch on (Downward)	Below 1 V
   v12-22 (RCLR) - Body ground	G - Body ground	Power seat switch RH (reclining switch (rearward)) signal	Reclining switch off	11 to 14 V
   			Reclining switch on (Rearward)	Below 1 V
   v12-23 (SLDR) - Body ground	GR - Body ground	Power seat switch RH (slide switch (rearward)) signal	Slide switch off	11 to 14 V
   			Slide switch on (Rearward)	Below 1 V
   v12-24 (SSRH) - Body ground*	P - Body ground	Headrest position signal	Headrest adjuster function operating	Pulse generation
   v12-25 (SSRL) - Body ground	B - Body ground	Rear lifter position signal	Rear lifter function operating	Pulse generation
   v12-26 (SSRS) - Body ground	G - Body ground	Slide position signal	Slide function operating	Pulse generation

   
   

   • *: for Standard Seat Type

for LHD:

1. Disconnect the v10 and v12 position control ECU assembly RH connectors.

2. Measure the voltage and resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   v10-2 (GND) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω
   v10-3 (+B) - Body ground	W - Body ground	Auxiliary battery power supply	Power switch off	11 to 14 V
   v12-1 (IG) - Body ground	P - Body ground	Ignition power supply	Power switch off	Below 1 V
   			Power switch on (IG)	11 to 14 V
   v12-15 (SYSB) - Body ground	G - Body ground	System power source	Power switch off	11 to 14 V
   v12-27 (DBCL) - Body ground	B - Body ground	Driver seat belt buckle switch signal	Driver seat belt unfastened	10 kΩ or higher
   			Driver seat belt fastened	Below 1 Ω
   v12-28 (DRDC) - Body ground	L - Body ground	Driver seat belt tension reducer signal	Power switch on (IG)	11 to 14 V

3. Reconnect the v10 and v12 position control ECU assembly RH connectors.

4. Measure the voltage and resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   v10-1 (SLD+) - Body ground	L - Body ground	Slide motor signal (forward)	Slide switch off	Below 1 V
   			Slide switch on (Forward)	11 to 14 V
   v10-4 (H+) - Body ground*	R - Body ground	Headrest motor signal (upward)	Headrest switch off	Below 1 V
   			Headrest switch on (Upward)	11 to 14 V
   v10-5 (SLD-) - Body ground	GR - Body ground	Slide motor signal (rearward)	Slide switch off	Below 1 V
   			Slide switch on (Rearward)	11 to 14 V
   v10-6 (LFT+) - Body ground	V - Body ground	Rear lifter motor signal (upward)	Rear lifter switch off	Below 1 V
   			Rear lifter switch on (Upward)	11 to 14 V
   v10-7 (FRV+) - Body ground	B - Body ground	Front vertical motor signal (upward)	Front vertical switch off	Below 1 V
   			Front vertical switch on (Upward)	11 to 14 V
   v10-9 (L+) - Body ground	V - Body ground	Lumbar support adjuster motor signal (forward)	Lumbar support adjuster switch off	Below 1 V
   			Lumbar support adjuster switch on (Forward)	11 to 14 V
   v10-10 (RCL+) - Body ground	P - Body ground	Reclining motor signal (forward)	Reclining switch off	Below 1 V
   			Reclining switch on (Forward)	11 to 14 V
   v11-2 (H-) - Body ground*	B - Body ground	Headrest motor signal (downward)	Headrest switch off	Below 1 V
   			Headrest switch on (Downward)	11 to 14 V
   v11-3 (L-) - Body ground	L - Body ground	Lumbar support adjuster motor signal (rearward)	Lumbar support adjuster switch off	Below 1 V
   			Lumbar support adjuster switch on (Rearward)	11 to 14 V
   v11-4 (FRV-) - Body ground	R - Body ground	Front vertical motor signal (downward)	Front vertical switch off	Below 1 V
   			Front vertical switch on (Downward)	11 to 14 V
   v11-5 (LFT-) - Body ground	G - Body ground	Lifter motor signal (downward)	Rear lifter switch off	Below 1 V
   			Rear lifter switch on (Downward)	11 to 14 V
   v11-6 (RCL-) - Body ground	LG - Body ground	Reclining motor signal (rearward)	Reclining switch off	Below 1 V
   			Reclining switch on (Rearward)	11 to 14 V
   v12-2 (FRLS) - Body ground	L - Body ground	Inner limit switch signal	Front seatback edge protector (inner limit switch assembly) off	Below 1 V
   			Front seatback edge protector (inner limit switch assembly) on	11 to 14 V
   v12-4 (LFLF) - Body ground	W - Body ground	Power seat switch RH (lumbar support adjuster switch (forward)) signal	Lumbar support adjuster switch off	11 to 14 V
   			Lumbar support adjuster switch on (Forward)	Below 1 V
   v12-5 (HEDU) - Body ground*	SB - Body ground	Power seat switch RH (headrest switch (Upward)) signal	Headrest switch off	11 to 14 V
   			Headrest switch on (Upward)	Below 1 V
   v12-6 (FRVU) - Body ground	L - Body ground	Power seat switch RH (front vertical switch (upward)) signal	Front vertical switch off	11 to 14 V
   			Front vertical switch on (Upward)	Below 1 V
   v12-7 (LFTU) - Body ground	BR - Body ground	Power seat switch RH (rear lifter switch (upward)) signal	Rear lifter switch off	11 to 14 V
   			Rear lifter switch on (Upward)	Below 1 V
   v12-8 (RCLF) - Body ground	R - Body ground	Power seat switch RH (reclining switch (forward)) signal	Reclining switch off	11 to 14 V
   			Reclining switch on (Forward)	Below 1 V
   v12-9 (SLDF) - Body ground	B - Body ground	Power seat switch RH (slide switch (forward)) signal	Slide switch off	11 to 14 V
   			Slide switch on (Forward)	Below 1 V
   v12-11 (SSRR) - Body ground	V - Body ground	Lumbar support position signal	Lumbar support adjuster function operating	Pulse generation
   v12-12 (SENG) - Body ground	BR - Body ground	Sensor ground	Always	Below 1 Ω
   v12-16 (LRLS) - Body ground	P - Body ground	Outer limit switch signal	Front seatback edge protector (outer limit switch assembly) off	Below 1 V
   			Front seatback edge protector (outer limit switch assembly) on	11 to 14 V
   v12-18 (LFLR) - Body ground	L - Body ground	Power seat switch RH (lumbar support adjuster switch (rearward)) signal	Lumbar support adjuster switch off	11 to 14 V
   v12-19 (HEDD) - Body ground*	P - Body ground	Power seat switch RH (headrest switch (downward)) signal	Headrest switch off	11 to 14 V
   			Headrest switch on (Downward)	Below 1 V
   v12-20 (FRVD) - Body ground	V - Body ground	Power seat switch RH (front vertical switch (downward)) signal	Front vertical switch off	11 to 14 V
   			Front vertical switch on (Upward)	Below 1 V
   v12-21 (LFTD) - Body ground	LG - Body ground	Power seat switch RH (rear lifter switch (downward)) signal	Rear lifter switch off	11 to 14 V
   			Rear lifter switch on (Downward)	Below 1 V
   v12-22 (RCLR) - Body ground	G - Body ground	Power seat switch RH (reclining switch (rearward)) signal	Reclining switch off	11 to 14 V
   			Reclining switch on (Rearward)	Below 1 V
   v12-23 (SLDR) - Body ground	GR - Body ground	Power seat switch RH (slide switch (rearward)) signal	Slide switch off	11 to 14 V
   			Slide switch on (Rearward)	Below 1 V
   v12-24 (SSRH) - Body ground*	P - Body ground	Headrest position signal	Headrest adjuster function operating	Pulse generation
   v12-25 (SSRL) - Body ground	B - Body ground	Rear lifter position signal	Rear lifter function operating	Pulse generation
   v12-26 (SSRS) - Body ground	G - Body ground	Slide position signal	Slide function operating	Pulse generation

   
   

   • *: for Standard Seat Type

for RHD:

1. Disconnect the w10 and w12 position control ECU assembly LH connectors.

2. Measure the voltage and resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   w10-2 (GND) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω
   w10-3 (+B) - Body ground	W - Body ground	Auxiliary battery power supply	Power switch off	11 to 14 V
   w12-1 (IG) - Body ground	P - Body ground	Ignition power supply	Power switch off	Below 1 V
   			Power switch on (IG)	11 to 14 V
   w12-15 (SYSB) - Body ground	G - Body ground	System power source	Power switch off	11 to 14 V
   w12-27 (DBCL) - Body ground	B - Body ground	Driver seat belt buckle switch signal	Driver seat belt unfastened	10 kΩ or higher
   			Driver seat belt fastened	Below 1 Ω
   w12-28 (DRDC) - Body ground	L - Body ground	Driver seat belt tension reducer signal	Power switch on (IG)	11 to 14 V

3. Reconnect the w10 and w12 position control ECU assembly LH connectors.

4. Measure the voltage and resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   w10-1 (SLD+) - Body ground	L - Body ground	Slide motor signal (forward)	Slide switch off	Below 1 V
   			Slide switch on (Forward)	11 to 14 V
   w10-4 (H+) - Body ground*	R - Body ground	Headrest motor signal (upward)	Headrest switch off	Below 1 V
   			Headrest switch on (Upward)	11 to 14 V
   w10-5 (SLD-) - Body ground	GR - Body ground	Slide motor signal (rearward)	Slide switch off	Below 1 V
   			Slide switch on (Rearward)	11 to 14 V
   w10-6 (LFT+) - Body ground	V - Body ground	Rear lifter motor signal (upward)	Rear lifter switch off	Below 1 V
   			Rear lifter switch on (Upward)	11 to 14 V
   w10-7 (FRV+) - Body ground	B - Body ground	Front vertical motor signal (upward)	Front vertical switch off	Below 1 V
   			Front vertical switch on (Upward)	11 to 14 V
   w10-9 (L+) - Body ground	V - Body ground	Lumbar support adjuster motor signal (forward)	Lumbar support adjuster switch off	Below 1 V
   			Lumbar support adjuster switch on (Forward)	11 to 14 V
   w10-10 (RCL+) - Body ground	P - Body ground	Reclining motor signal (forward)	Reclining switch off	Below 1 V
   			Reclining switch on (Forward)	11 to 14 V
   w11-2 (H-) - Body ground*	B - Body ground	Headrest motor signal (downward)	Headrest switch off	Below 1 V
   			Headrest switch on (Downward)	11 to 14 V
   w11-3 (L-) - Body ground	L - Body ground	Lumbar support adjuster motor signal (rearward)	Lumbar support adjuster switch off	Below 1 V
   			Lumbar support adjuster switch on (Rearward)	11 to 14 V
   w11-4 (FRV-) - Body ground	R - Body ground	Front vertical motor signal (downward)	Front vertical switch off	Below 1 V
   			Front vertical switch on (Downward)	11 to 14 V
   w11-5 (LFT-) - Body ground	G - Body ground	Lifter motor signal (downward)	Rear lifter switch off	Below 1 V
   			Rear lifter switch on (Downward)	11 to 14 V
   w11-6 (RCL-) - Body ground	LG - Body ground	Reclining motor signal (rearward)	Reclining switch off	Below 1 V
   			Reclining switch on (Rearward)	11 to 14 V
   w12-2 (FRLS) - Body ground	L - Body ground	Inner limit switch signal	Front seatback edge protector (inner limit switch assembly) off	Below 1 V
   			Front seatback edge protector (inner limit switch assembly) on	11 to 14 V
   w12-4 (LFLF) - Body ground	W - Body ground	Power seat switch LH (lumbar support adjuster switch (forward)) signal	Lumbar support adjuster switch off	11 to 14 V
   			Lumbar support adjuster switch on (Forward)	Below 1 V
   w12-5 (HEDU) - Body ground*	SB - Body ground	Power seat switch LH (headrest switch (Upward)) signal	Headrest switch off	11 to 14 V
   			Headrest switch on (Upward)	Below 1 V
   w12-6 (FRVU) - Body ground	L - Body ground	Power seat switch LH (front vertical switch (upward)) signal	Front vertical switch off	11 to 14 V
   			Front vertical switch on (Upward)	Below 1 V
   w12-7 (LFTU) - Body ground	BR - Body ground	Power seat switch LH (rear lifter switch (upward)) signal	Rear lifter switch off	11 to 14 V
   			Rear lifter switch on (Upward)	Below 1 V
   w12-8 (RCLF) - Body ground	R - Body ground	Power seat switch LH (reclining switch (forward)) signal	Reclining switch off	11 to 14 V
   			Reclining switch on (Forward)	Below 1 V
   w12-9 (SLDF) - Body ground	B - Body ground	Power seat switch LH (slide switch (forward)) signal	Slide switch off	11 to 14 V
   			Slide switch on (Forward)	Below 1 V
   w12-11 (SSRR) - Body ground	V - Body ground	Lumbar support position signal	Lumbar support adjuster function operating	Pulse generation
   w12-12 (SENG) - Body ground	BR - Body ground	Sensor ground	Always	Below 1 Ω
   w12-16 (LRLS) - Body ground	P - Body ground	Outer limit switch signal	Front seatback edge protector (outer limit switch assembly) off	Below 1 V
   			Front seatback edge protector (outer limit switch assembly) on	11 to 14 V
   w12-18 (LFLR) - Body ground	L - Body ground	Power seat switch LH (lumbar support adjuster switch (rearward)) signal	Lumbar support adjuster switch off	11 to 14 V
   w12-19 (HEDD) - Body ground*	P - Body ground	Power seat switch LH (headrest switch (downward)) signal	Headrest switch off	11 to 14 V
   			Headrest switch on (Downward)	Below 1 V
   w12-20 (FRVD) - Body ground	V - Body ground	Power seat switch LH (front vertical switch (downward)) signal	Front vertical switch off	11 to 14 V
   			Front vertical switch on (Upward)	Below 1 V
   w12-21 (LFTD) - Body ground	LG - Body ground	Power seat switch LH (rear lifter switch (downward)) signal	Rear lifter switch off	11 to 14 V
   			Rear lifter switch on (Downward)	Below 1 V
   w12-22 (RCLR) - Body ground	G - Body ground	Power seat switch LH (reclining switch (rearward)) signal	Reclining switch off	11 to 14 V
   			Reclining switch on (Rearward)	Below 1 V
   w12-23 (SLDR) - Body ground	GR - Body ground	Power seat switch LH (slide switch (rearward)) signal	Slide switch off	11 to 14 V
   			Slide switch on (Rearward)	Below 1 V
   w12-24 (SSRH) - Body ground*	p - Body ground	Headrest position signal	Headrest adjuster function operating	Pulse generation
   w12-25 (SSRL) - Body ground	B - Body ground	Rear lifter position signal	Rear lifter function operating	Pulse generation
   w12-26 (SSRS) - Body ground	G - Body ground	Slide position signal	Slide function operating	Pulse generation

   
   

   • *: for Standard Seat Type

for LHD:

1. Disconnect the S9 front multiplex network door ECU LH connector.

2. Measure the voltage and resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   S9-3 (SIG) - Body ground	LA-B - Body ground	Ignition power supply (IG signal)	Power switch off → on (IG)	Below 1 V → 11 to 14 V
   S9-4 (CPUB) - Body ground	LA-LG - Body ground	Auxiliary battery power supply	Power switch off	11 to 14 V
   S9-6 (BDR) - Body ground	R - Body ground	Auxiliary battery power supply	Power switch off	11 to 14 V
   S9-1 (GND) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω

3. Reconnect the S9 front multiplex network door ECU LH connector.

4. Measure the voltageand resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   S9-24 (M3) - S9-26 (MSWE)	V - W-B	M3 switch signal for seat memory switch	M3 switch on	Below 1 V
   			M3 switch off	11 to 14 V
   S9-23 (M2) - S9-26 (MSWE)	G - W-B	M2 switch signal for seat memory switch	M2 switch on	Below 1 V
   			M2 switch off	11 to 14 V
   S9-22 (M1) - S9-26 (MSWE)	BE - W-B	M1 switch signal for seat memory switch	M1 switch on	Below 1 V
   			M1 switch off	11 to 14 V
   S9-25 (MM) - S9-26 (MSWE)	L - W-B	SET switch signal for seat memory switch	SET switch on	Below 1 V
   			SET switch off	11 to 14 V
   S9-26 (MSWE) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω

for RHD:

1. Disconnect the R9 front multiplex network door ECU RH connector.

2. Measure the voltage and resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   R9-3 (SIG) - Body ground	LA-B - Body ground	Ignition power supply (IG signal)	Power switch off → on (IG)	Below 1 V → 11 to 14 V
   R9-4 (CPUB) - Body ground	LA-LG - Body ground	Auxiliary battery power supply	Power switch off	11 to 14 V
   R9-6 (BDR) - Body ground	R - Body ground	Auxiliary battery power supply	Power switch off	11 to 14 V
   R9-1 (GND) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω

3. Reconnect the R9 front multiplex network door ECU LH connector.

4. Measure the voltageand resistance according to the value(s) in the table below.

   Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
   R9-24 (M3) - R9-26 (MSWE)	V - W-B	M3 switch signal for seat memory switch	M3 switch on	Below 1 V
   			M3 switch off	11 to 14 V
   R9-23 (M2) - R9-26 (MSWE)	G - W-B	M2 switch signal for seat memory switch	M2 switch on	Below 1 V
   			M2 switch off	11 to 14 V
   R9-22 (M1) - R9-26 (MSWE)	BE - W-B	M1 switch signal for seat memory switch	M1 switch on	Below 1 V
   			M1 switch off	11 to 14 V
   R9-25 (MM) - R9-26 (MSWE)	L - W-B	SET switch signal for seat memory switch	SET switch on	Below 1 V
   			SET switch off	11 to 14 V
   R9-26 (MSWE) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω