FRONT POWER SEAT CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Seat.

      5. Select the setting by referring to the table below.


        Seat
        Tester Display Description Default Setting ECU
        Driver Seat Slide Link Hdrest Length Ctrl Function to the physique compensation headrest control when driver seat is slide (for Standard Seat Type) Avail 0:Avail,1:Not Avl Position control ECU assembly (for Driver Seat)
        Passenger Seat Slide Link Headrest Length Control Function to the physique compensation headrest control when front passenger seat is slide (for Standard Seat Type) Avail 0:Avail,1:Not Avl Position control ECU assembly (for Front Passenger Seat)
        D Seat Operation Interference Avoidance Function Setting of the function to reverse operation when jam detection is detected during slide direction driver seat ON 0:ON,1:OFF Position control ECU assembly (for Driver Seat)
        P Seat Operation Interference Avoidance Function Setting of the function to reverse operation when jam detection is detected during slide direction front passenger seat ON 0:ON,1:OFF Position control ECU assembly (for Front Passenger Seat)

      6. Enter the following menus: Customize Setting / Entry & Start / Access.

      7. Select the setting by referring to the table below.


        Entry & Start
        Tester Display Description Default Setting ECU
        Seat position/Tilt & Telesco memory recall setting This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system". D Door 0:D Door,1:Any Door Main body ECU (Multiplex network body ECU)