HEADUP DISPLAY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL HEADUP DISPLAY


    1. B004AMYC02
      B004C4F Bolt
      B004ANI Connector

      Connect the connector.

    2. Install the headup display with the 3 bolts.

  2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. INSTALL NO. 2 DECK BOARD

    Click here

  5. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

    Click here

  6. ADJUST PARKING ASSIST MONITOR SYSTEM

    Click here

  7. CHECK SRS WARNING LIGHT

    Click here