COMBINATION METER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL METER HOOD SPACER


    1. B004ASZ

      Attach the claws to install the meter hood spacer.

  2. INSTALL COMBINATION METER ASSEMBLY


    1. B004C5DC01
      B004B1M Install in this Direction

      Temporarily install the combination meter assembly in the direction indicated by the arrow in the illustration.

    2. B004BZ4

      Connect the 2 connectors and attach the wire harness clamps.

    3. B004BCKC01
      B004B1M Install in this Direction

      Attach the guides and claws in the direction indicated by the arrow in the illustration.

    4. B004CC5

      Install the combination meter assembly with the 4 screws.

  3. INSTALL METER HOOD SUB-ASSEMBLY

    Click here

  4. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  5. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

    Click here