FRONT DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL COURTESY LIGHT SWITCH


    1. Connect the connector.

    2. Remove the tape to prevent wire harness from falling wire harness.

    3. Using a T30 "TORX" socket wrench, install the courtesy light switch with the "TORX" screw.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }
      B004BUXC01
      B004CG0 Tape to prevent wire harness from falling B004B1M Install in this Direction