DOOR COURTESY LIGHT INSPECTION

PROCEDURE


  1. INSPECT COURTESY LIGHT ASSEMBLY LH


    1. B000OQDC11
      *a

      Component without harness connected

      (Courtesy Light Assembly LH)

      Inspect the courtesy light assembly LH.


      1. Apply auxiliary battery voltage to the connector and check the light illumination condition.

        OK
        Auxiliary Battery Connection Specified Condition

        Positive (+) → 2 (B)

        Negative (-) → 1 (SW)

        Courtesy light assembly LH illuminates
        If the result is not as specified, replace the courtesy light assembly LH.
  2. INSPECT COURTESY LIGHT ASSEMBLY RH


    1. B000OQDC11
      *a

      Component without harness connected

      (Courtesy Light Assembly RH)

      Inspect the courtesy light assembly RH.


      1. Apply auxiliary battery voltage to the connector and check the light illumination condition.

        OK
        Auxiliary Battery Connection Specified Condition

        Positive (+) → 2 (B)

        Negative (-) → 1 (SW)

        Courtesy light assembly RH illuminates
        If the result is not as specified, replace the courtesy light assembly RH.