VANITY LIGHT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL VISOR ASSEMBLY LH


    1. B004CI8C01
      B004B1M Install in this Direction

      Align the visor assembly LH and the vehicle side connector and screw hole to set it in place.

      Note


      • Hold the visor assembly with one hand so that it does not drop.

      • Set the visor assembly LH directly upwards so that the connector is not damaged.

    2. Install the 2 screws.

    3. Set the visor assembly LH to the visor holder LH.

  2. INSTALL VISOR BRACKET COVER LH

    Click here