AMBIENT LIGHT(for Front Door) INSPECTION

PROCEDURE

1. INSPECT FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

   
   
   1. 

      *a	Component without harness connected (Front Door Trim Board Sub-assembly LH)

      Inspect the front door trim board sub-assembly LH.

      
      

      1. Apply auxiliary battery voltage to the connector and check the illumination conditions.

         OK
         Auxiliary Battery Connection Specified Condition Positive (+) → 1 Negative (-) → 2 Ambient illumination light LH illuminates If the result is not as specified, replace the front door trim board sub-assembly LH.

2. INSPECT FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH

   
   
   1. 

      *a	Component without harness connected (Front Door Trim Board Sub-assembly RH)

      Inspect the front door trim board sub-assembly RH.

      
      

      1. Apply auxiliary battery voltage to the connector and check the illumination conditions.

         OK
         Auxiliary Battery Connection Specified Condition Positive (+) → 1 Negative (-) → 2 Ambient illumination light RH illuminates If the result is not as specified, replace the front door trim board sub-assembly RH.