LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      ACC SW Power switch on (ACC) signal OFF or ON

      ON: Power switch on (ACC)

      OFF: Power switch off

      		 "ON" is also displayed for this item when the power switch is on (IG).
      IG SW Power switch on (IG) signal OFF or ON

      ON: Power switch on (IG)

      OFF: Power switch off

      		 "OFF" is also displayed for this item when the power switch is on (ACC).
      FR Door Lock Pos Front door RH unlock detection switch signal LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Courtesy light switch RH signal OFF or ON

      OFF: Front door RH closed

      ON: Front door RH open

      		 -
      FL Door Lock Pos Front door LH unlock detection switch signal LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Courtesy light switch LH signal OFF or ON

      OFF: Front door LH closed

      ON: Front door LH open

      		 -
      Luggage Courtesy SW Luggage compartment door courtesy switch signal OFF or ON

      OFF: Luggage compartment door closed

      ON: Luggage compartment door open

      		 -
      Interior Light Control Operation of the illuminated entry system OFF or ON Customized value is displayed Displayed only when All Data is selected.
      I/L ON W/Door Key Unlock Function that lights up the interior lights when the doors are unlocked OFF or ON Customized value is displayed Displayed only when All Data is selected.
      Lighting Time Lighting time of the delay control function (illuminated entry system) 15s, 7.5s or 30s Customized value is displayed Displayed only when All Data is selected.
      Room Light when Aprchd Function that lights up the interior lights when a key enters any actuation area OFF or ON Customized value is displayed Displayed only when All Data is selected.
      Inside Foot Light Function that lights up the No. 1 interior illumination light assembly (footwell light) OFF or ON Customized value is displayed Displayed only when All Data is selected.
      I/L when ACC OFF Function that lights up the interior lights when the power switch is turned from on (ACC or IG) to off OFF or ON Customized value is displayed Displayed only when All Data is selected.
      Light Control Function that lights up the ambient lights (while driving) OFF or ON Customized value is displayed Displayed only when All Data is selected.
      Interior Illumination Light Function that lights up the ambient lights (always) OFF or ON Customized value is displayed Displayed only when All Data is selected.

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Main Body > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Illuminated Entry System Map light sub-assembly (front dome light) illumination OFF or ON Perform the Active Test with DOOR switch in the map light sub-assembly turned on.
      Fr Foot Light No. 1 interior illumination light assembly (footwell light) ON or OFF -
      Relay for Interior Light Auto Cut Function DOME CUT D relay ON or OFF

      ON: DOME CUT D relay off (interior lights turn off)

      OFF: DOME CUT D relay on (interior lights turn on)
      Interior Illumination Light1 Multi-display (interior illumination light assembly) ON or OFF

      Preconditions for using the Active Test to check dimmer controlled illumination:


      • Power switch on (READY).

      • Shift lever is in any position other than P.
      Interior Illumination Light2 Front door trim board sub-assembly (door ambient illumination light) ON or OFF

      Preconditions for using the Active Test to check dimmer controlled illumination:


      • Power switch on (READY).

      • Shift lever is in any position other than P.

      Body Electrical > Entry&Start > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Power/Engine SW Light Power switch illumination OFF or ON -