FRONT DOOR LOCK INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY LH


    1. B004APSC01
      B004B1M Install in this Direction

      w/o Double Locking System:


      1. Install the front door inside locking cable assembly LH to the front door lock with motor assembly LH and attach the clamp as shown in the illustration.

    2. B004A5VC01
      B004B1M Install in this Direction

      w/ Double Locking System:


      1. Install the front door inside locking cable assembly LH to the front door lock with motor assembly LH and attach the clamp as shown in the illustration.

  2. INSTALL FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH


    1. B004BO5C01
      B004B1M Install in this Direction

      w/o Double Locking System:


      1. Install the front door lock remote control cable assembly LH to the front door lock with motor assembly LH and attach the clamp as shown in the illustration.

    2. B004CHBC01
      B004B1M Install in this Direction

      w/ Double Locking System:


      1. Install the front door lock remote control cable assembly LH to the front door lock with motor assembly LH and attach the clamp as shown in the illustration.

  3. INSTALL FRONT DOOR LOCK COVER SUB-ASSEMBLY LH


    1. B004A90

      w/o Double Locking System:


      1. Attach the claws.

      2. B004BOPC01
        B004B1M Install in this Direction

        Attach the claws to install the front door lock cover sub-assembly LH as shown in the illustration.

    2. w/ Double Locking System:


      1. B004BFM

        Attach the claws.

      2. B004BIPC02
        B004B1M Install in this Direction

        Attach the claws to install the front door lock cover sub-assembly LH as shown in the illustration.

  4. INSTALL FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH

    Note


    • When reusing the removed front door lock with motor assembly LH, be sure to replace the door lock wire harness seal on the connector with a new one.

    • Keep the door lock wire harness seal of the connector free from grease and dust, etc.

    • Reusing the door lock wire harness seal or using a damaged door lock wire harness seal may cause water to enter the connecting part. This may result in a malfunction of the front door lock with motor assembly LH.


    1. w/o Double Locking System:


      1. Apply MP grease to the sliding parts of the front door lock with motor assembly LH.

      2. B0049YV

        When reusing front door lock with motor assembly LH:


        • Install a new door lock wire harness seal to the front door lock with motor assembly LH.

      3. Install a new door lock wire harness seal to the front door lock with motor assembly LH.

      4. B004B8QC01
        B004C4F "TORX" screw
        B004ANI Connector

        Using a T30 "TORX" socket wrench, install the front door lock with motor assembly LH with the 3 screws.

        Torque:
        5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      5. Connect the connector.

    2. w/ Double Locking System:


      1. Apply MP grease to the sliding parts of the front door lock with motor assembly LH.

      2. B004CCX

        When reusing front door lock with motor assembly LH:


        • Install a new door lock wire harness seal to the front door lock with motor assembly LH.

      3. Install a new door lock wire harness seal to the front door lock with motor assembly LH.

      4. B004C3RC03
        B004C4F "TORX" screw
        B004ANI Connector

        Using a T30 "TORX" socket wrench, install the front door lock with motor assembly LH with the 3 screws.

        Torque:
        5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      5. Connect the connector.

  5. INSTALL FRONT DOOR INSIDE PANEL SUB-ASSEMBLY LH

    Click here

  6. INSTALL FRONT DOOR DIVISION BAR SEAL LH

    Click here

  7. INSTALL FRONT DOOR FRONT LOWER FRAME UPPER COVER LH

    Click here

  8. INSTALL NO. 1 FRONT DOOR HOLE COVER SUB-ASSEMBLY LH

    Click here

  9. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX

    Click here

  10. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH

    Click here

  11. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (for Driver Side)

    Click here

  12. INSTALL FRONT DOOR TRIM COVER SUB-ASSEMBLY LH (for Driver Side)

    Click here

  13. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH (for Front Passenger Side)

    Click here

  14. INSTALL FRONT DOOR ASSIST GRIP ASSEMBLY RH (for Front Passenger Side)

    Click here

  15. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  16. INSTALL NO. 2 DECK BOARD

    Click here

  17. INSPECT SRS WARNING LIGHT

    Click here

  18. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  19. INSPECT POWER WINDOW OPERATION

    Click here