INTEGRATION RELAY(for Engine Room Side) INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 SEMICONDUCTOR POWER INTEGRATION ECU


    1. B004ACCC01
      *a Power Supply Connector
      *b Lever Connector
      B004ANI Connector

      Connect the power supply and lever connector to the No. 1 semiconductor power integration ECU.

      Note


      • Do not touch the No. 1 semiconductor power integration ECU connector.

      • When pulling the No. 1 semiconductor power integration ECU, take care not to damage it.

      • Do not use a No. 1 semiconductor power integration ECU that has been dropped or subjected to a strong shock.

    2. B004BXHC01
      B004B1M Install in this Direction

      Attach the claw to install the No. 1 semiconductor power integration ECU.

      Note

      When installing the No. 1 semiconductor power integration ECU, take care not to damage it.

  2. INSTALL RELAY BLOCK UPPER COVER


    1. B004BIAC01
      B004B1M Install in this Direction

      Attach the claw to install the relay block upper cover.

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. INSTALL NO. 2 DECK BOARD

    Click here