INTEGRATION RELAY(for Luggage Compartment) INSTALLATION

PROCEDURE


  1. INSTALL NO. 3 SEMICONDUCTOR POWER INTEGRATION ECU


    1. B004B6CC01
      B004B1M Install in this Direction

      Attach the claw to install the No. 3 semiconductor power integration ECU.

      Note


      • Do not touch the No. 3 semiconductor power integration ECU connector.

      • When removing the No. 3 semiconductor power integration ECU, take care not to damage it.

      • Do not use a No. 3 semiconductor power integration ECU that has been dropped or subjected to a strong shock.

    2. B004BF3C01
      *a Power Supply Connector
      *b Lever Connector
      B004ANI Connector

      Connect the power supply connector and lever connector.

      Note

      When installing the No. 3 semiconductor power integration ECU, take care not to damage it.

    3. B004C7IC03
      B004C4F Bolt

      Connect the connector holder with the bolt.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  2. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

    Click here

  3. INSTALL LUGGAGE COMPARTMENT TRIM FRONT COVER

    Click here

  4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  5. INSTALL LUGGAGE COMPARTMENT TRIM BOX

    Click here

  6. INSTALL REAR FLOOR FINISH PLATE

    Click here

  7. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  8. INSTALL NO. 1 DECK BOARD

    Click here

  9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  10. INSTALL NO. 2 DECK BOARD

    Click here