BATTERY CURRENT SENSOR INSTALLATION

PROCEDURE


  1. INSTALL BATTERY STATE SENSOR ASSEMBLY


    1. Attach the 2 claws and install the battery state sensor assembly to the battery state sensor holder.

    2. Install the battery state sensor assembly to the auxiliary battery and tighten the nut.

      Torque:
      6.4 N*m  { 65 kgf*cm, 57 in.*lbf }

      Tech Tips

      Align the battery state sensor assembly with the position shown in the illustration and then install it.

      B0049T9C02
      *a 5.0 mm (0.197 in.) or less
      B004C4F Push in a clockwise direction

    3. Connect the engine wire to the battery state sensor assembly with the nut.

      Torque:
      7.6 N*m  { 77 kgf*cm, 67 in.*lbf }

      Note

      When disconnecting the engine wire, some systems need to be initialized after the engine wire is reconnected.

      Click here

    4. Connect the battery state sensor assembly connector.

    5. Engage the 2 claws to connect the wire harness to the battery current sensor holder.

  2. INSTALL NO. 2 DECK BOARD

    Click here