DIFFERENTIAL MOUNT CUSHION INSTALLATION

PROCEDURE


  1. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, install a new rear No. 1 differential mount cushion.

      SST
      09570-24011
      09570-48010
      B000RT7C01
      *a SST (09570-48010) *b SST (09570-24011)
      *c 0° +/- 3° - -
      B004C4F SST bolt location B004ANI Front of the Vehicle

      Note


      • Make sure that the rear No. 1 differential mount cushion is aligned within 3° from the center.

      • Temporarily install the rear No. 1 differential mount cushion to the rear suspension member sub-assembly in order to prevent it from tilting, and then install SST.

      • Before using SST, apply grease to the SST bolts.

      • Be sure to use the correct combination of SST.

      • Do not tilt the bolts of SST.

      • Tighten the 2 bolts of SST so that they enter the 2 holes of the rear No. 1 differential mount cushion by an equal amount.

      Tech Tips

      Install the 2 SST bolts to the 2 SST holes as shown in the illustration.

  2. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here