PARKING LOCK RELEASE CABLE REMOVAL

PROCEDURE


  1. REMOVE NO. 1 CONSOLE BOX SUPPORT

    Click here

  2. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

    Click here

  3. REMOVE UPPER NO. 1 CONSOLE SUPPORT BRACKET

    Click here

  4. REMOVE NO. 2 PARKING LOCK RELEASE CABLE ASSEMBLY


    1. B004BIRC01
      B004C4F Bolt
      B004ANI Nut and Spring Washer

      Remove the nut, spring washer and 2 bolts and disconnect the No. 2 parking lock release cable assembly from the shift control actuator assembly.

    2. B004BHMC01
      *1 Cover
      B004B1M Disconnect

      Detach the 2 claws and disconnect the cover from the No. 2 parking lock release cable assembly as shown in the illustration.

    3. B004BWKC01
      *1 Parking Lock Release Lever Assembly Cable End
      *2 No. 2 Parking Lock Release Cable Assembly Cable End

      Disconnect the parking lock release lever assembly cable end from the No. 2 parking lock release cable assembly cable end.

    4. B000PY3

      Remove the 2 bolts and No. 2 parking lock release cable assembly from the No. 2 parking release cable bracket sub-assembly.

  5. REMOVE TRANSMISSION CONTROL SHAFT LEVER


    1. B000PMU

      Remove the nut, spring washer and transmission control shaft lever from the No. 2 parking lock release cable assembly.

  6. REMOVE PARKING LOCK RELEASE LEVER ASSEMBLY


    1. B000PMA

      Remove the nut and No. 1 parking lock release cable clamp bracket from the body.

    2. B004BQPC01
      *a Protector

      Remove the No. 1 parking lock release cable clamp bracket from the parking lock release lever assembly protector.

    3. B004C5ZC01
      *A for LHD
      *B for RHD

      Remove the 4 bolts and pull out the parking lock release lever assembly from the floor panel through holes to remove it.

      Tech Tips


      • Do not damage the cable with the floor panel through holes.

      • Do not bend the cable.

  7. REMOVE NO. 2 PARKING RELEASE CABLE BRACKET SUB-ASSEMBLY

    Tech Tips

    There is no need to remove this unless the No. 2 parking release cable bracket sub-assembly is replaced.


    1. B000S97

      Remove the 2 bolts and No. 2 parking release cable bracket sub-assembly from the engine rear mounting member.