GENERATOR CABLE INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

As the engine assembly with transmission is extremely heavy, the engine lifter may suddenly drop if the instructions listed in the repair manual are not followed.

Therefore, always follow the instructions listed in the repair manual when performing this procedure.

PROCEDURE


  1. INSTALL GENERATOR CABLE

    Note

    When installing the generator cable, make sure not to bend the generator cable base on the hybrid vehicle transmission assembly side.


    1. B004BKB

      Using an insulated tool, temporarily install the generator cable to the hybrid vehicle transmission assembly with the 5 bolts.

      Note

      Keep foreign matter, water, etc., away from the generator cable terminals and their installation area.

      Tech Tips

      When installing the generator cable, hold the generator cable by hand so that the generator cable base is not bent.

    2. B004AE2

      Using an insulated tool, tighten the generator cable terminals with the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      Keep foreign matter, water, etc., away from the generator cable terminals and their installation area.

      Tech Tips

      When installing the generator cable, hold the generator cable by hand so that the generator cable base is not bent.

    3. B004BGB

      Using an insulated tool, tighten the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      Keep foreign matter, water, etc., away from the generator cable terminals and their installation area.

    4. B004AJK

      Attach the 2 claws to install a new terminal cap to the hybrid vehicle transmission assembly.

      Note


      • Check that the terminal cap is securely installed.

      • Do not pinch the O-ring.

    5. B004AYG

      Using an insulated tool, install the connector cover to the hybrid vehicle transmission assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    6. B004AT2

      for LHD:

      Connect the 3 clamps of the generator cable to the engine assembly.

    7. B004A0X

      for RHD:

      Connect the 2 clamps of the generator cable to the engine assembly.

  2. INSTALL ENGINE ASSEMBLY WITH HYBRID VEHICLE TRANSMISSION

    Click here

  3. PERFORM INITIALIZATION

    Click here

  4. PERFORM RESOLVER INITIALIZATION

    Click here