FRONT CAMERA INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY


    1. B000QTZC01
      *a Guide
      *b Connector Clamp
      B004B1M Install in this Direction

      Attach the guide and claw.

    2. Attach the guide to install the wire harness to the forward recognition bracket as shown in the illustration.

    3. Attach the connector clamp to install the forward recognition with heater hood sub-assembly.

    4. B000THN

      Connect the connector.

  2. INSTALL FORWARD RECOGNITION CAMERA

    Note


    • When replacing the forward recognition camera, replace it with a new one.

    • Do not touch the camera lens. If the camera lens has been touched, do not use the forward recognition camera.

    • If the forward recognition camera has been struck or dropped, replace it with a new one.

    • If the forward recognition camera is not properly installed, forward recognition camera optical axis learning cannot be performed properly. Make sure the forward recognition camera is installed securely.

    • Replace the forward recognition camera if there is any foreign matter on the camera lens.

    • When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Lexus genuine part. If a non-Lexus genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the dynamic radar cruise control system, forward recognition camera system, LKA/LDA system, road sign assist system, pre-collision system or automatic high beam system may not operate properly due to a difference in the transmissivity or black ceramic border.

    • If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.

    • If there is any foreign matter on the area of the windshield glass in front of the forward recognition camera, clean the windshield glass before installing the forward recognition camera.


    1. B000SRG

      When using a new forward recognition camera:


      1. Remove the protective film.

        Note

        Do not touch the camera lens after removing the protective film.

    2. B000PUTC01
      B004B1M Install in this Direction

      Attach the guide to install the forward recognition camera as shown in the illustration.

      Note

      Do not touch the camera lens.

    3. B000QY4

      Connect the connector.

  3. INSTALL FORWARD RECOGNITION LATCH

    Note

    Before installing the forward recognition latch, be sure to check that the forward recognition camera is securely installed.


    1. B000RQTC01
      B004B1M Install in this Direction (1)
      B004CNL Install in this Direction (2)

      Attach the guide and claw to install the forward recognition camera as shown in the illustration.

      Note

      Check that the forward recognition latch is securely installed.

  4. INSTALL NO. 1 FORWARD RECOGNITION COVER


    1. B000POJC01
      B004B1M Install in this Direction

      Attach the guide and clip as shown in the illustration to install the No. 1 forward recognition cover.

      Note

      When installing, press the cover parallel to the windshield glass surface and install.

  5. ADJUST FORWARD RECOGNITION CAMERA


    1. If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform forward recognition camera learning.

      Click here