ENGINE OIL COOLER INSTALLATION

PROCEDURE

1. INSTALL OIL COOLER ASSEMBLY

   
   

   1. Install 2 new gaskets to the oil bracket sub-assembly.

   2. Install the oil cooler assembly with the 2 bolts and 2 nuts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

2. CONNECT WATER BY-PASS HOSE

   
   

   1. Connect the 2 water by-pass hoses.

3. ADD ENGINE OIL

   Click here

4. CHECK ENGINE OIL LEVEL

   Click here

5. ADD ENGINE COOLANT

   Click here

6. INSPECT FOR ENGINE OIL LEAK

   Click here

7. INSPECT FOR COOLANT LEAK

   Click here

8. INSTALL STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY

   Click here

9. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

   Click here

10. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

11. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

12. INSTALL RADIATOR SUPPORT TO FRAME SEAL RH

    Click here

13. INSTALL LOWER RADIATOR AIR DEFLECTOR

    Click here