OIL PRESSURE SWITCH INSPECTION

CAUTION / NOTICE / HINT

CAUTION:


  • B000S8D

    To prevent injury due to contact with an operating V-ribbed belt or cooling fan, keep your hands and clothing away from the V-ribbed belt and cooling fans when working in the engine compartment with the engine running or the power switch on (IG).

  • B004CM2

    To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.

PROCEDURE


  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the engine oil pressure switch connector.

    2. Put the engine in inspection mode (maintenance mode).

      Click here

    3. Start the engine.

    4. B000SSU

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - Switch body Engine stopped Below 1 Ω
      Idling 10 kΩ or higher

      If the result is not as specified, replace the engine oil pressure switch assembly.

    5. Reconnect the engine oil pressure switch connector.