PCV VALVE INSTALLATION

PROCEDURE


  1. INSTALL PCV VALVE


    1. Apply a light coat of engine oil to the O-ring.

      Note

      When reusing the PCV valve, inspect the O-ring.

    2. B004AG2C07
      *a Torque Wrench Fulcrum Length

      Using a ball joint lock nut wrench (22 mm), install the PCV valve to the cylinder head cover sub-assembly LH.

      Torque
      Specified tightening torque
      5.0 N*m (51 kgf*cm, 44 in.*lbf)

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using a ball joint lock nut wrench (fulcrum length of 149.75 mm (5.90 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)): 2.6 N*m (27 kgf*cm, 23 in.*lbf)

  2. CONNECT PCV HOSE


    1. Connect the PCV hose to the PCV valve, and slide the clip to secure hose.

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. Attach the clip and install the No. 1 engine cover to the cylinder head cover sub-assembly LH.

    2. Attach the clamp and connect the engine wire to the cylinder head cover sub-assembly LH.

  4. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here