PURGE VALVE INSTALLATION

PROCEDURE

1. INSTALL PURGE VSV

   
   

   1. Install the purge VSV to the intake air surge tank assembly with the bolt.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

   2. Connect the No. 1 fuel vapor feed hose to the purge VSV.

   3. Connect the No. 2 fuel vapor feed hose to the purge VSV.

   4. Connect the connector to the purge VSV.

2. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here