CYLINDER HEAD COMPONENTS
ILLUSTRATION
| *1 | INTAKE VALVE | *2 | INTAKE VALVE GUIDE BUSH |
| *3 | INTAKE VALVE STEM OIL SEAL | *4 | EXHAUST VALVE |
| *5 | EXHAUST VALVE GUIDE BUSH | *6 | EXHAUST VALVE STEM OIL SEAL |
| *7 | VALVE SPRING SEAT | *8 | NO. 1 STRAIGHT SCREW PLUG |
| *9 | NO. 2 STRAIGHT SCREW PLUG | *10 | NO. 3 STRAIGHT SCREW PLUG |
| *11 | VALVE SPRING RETAINER LOCK | *12 | VALVE SPRING RETAINER |
| *13 | SPARK PLUG TUBE | *14 | INNER COMPRESSION SPRING |
| *15 | GASKET | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Adhesive 1324 | ★ | Precoated part |
ILLUSTRATION
| *1 | STUD BOLT | *2 | STRAIGHT PIN |
| *3 | UNION | *4 | RING PIN |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | * | For use with a union nut wrench |
| ● | Non-reusable part | |
Adhesive 1324 |
| ★ | Precoated part | - | - |