FUEL PRESSURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY (FUEL PRESSURE SENSOR)

   Tech Tips

   Perform "Inspection After Repair" after replacing the fuel delivery pipe sub-assembly (fuel pressure sensor).

   Click here

   Click here

   Note

   
   

   • Do not remove the fuel pressure sensor from the fuel delivery pipe sub-assembly.

   • If the fuel pressure sensor is removed, replace the fuel delivery pipe sub-assembly (fuel pressure sensor) with a new one.

2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. INSTALL NO. 2 DECK BOARD

   Click here

4. INSPECT FOR FUEL LEAK

   Click here