BATTERY COOLING FILTER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL NO. 2 HV BATTERY INTAKE FILTER


    1. B000QH0

      Attach the 2 guides to temporarily install the No. 2 HV battery intake filter.

    2. Attach the 2 claws to install the No. 2 HV battery intake filter.

  2. INSTALL BATTERY SERVICE HOLE COVER


    1. B000PCP

      Attach the 3 clips to install the battery service hole cover.

  3. CLEAR DTC

    Tech Tips

    If the message "Maintenance Required for Traction battery Cooling Parts See owner's manual" is displayed on the multi-information display, clean or replace the No. 2 HV battery intake filter, and clear the DTCs to reset the learning values even if no DTCs are output.

    Click here