ACCELERATOR PEDAL SENSOR INSTALLATION

PROCEDURE

1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

   Note

   
   

   • Avoid excessive force to the accelerator pedal sensor.

   • Do not disassemble the accelerator pedal sensor assembly.

   • This accelerator pedal does not require lubrication.

     Do not apply oil or lubricant to the accelerator pedal sensor assembly.

     If applied, the accelerator pedal sensor assembly must be replaced.

   
   

   1. Install the accelerator pedal sensor assembly with the 3 nuts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      
      

      • Do not drop the accelerator pedal sensor assembly, strike it with tools or subject it to impact.

      • If the accelerator pedal sensor assembly is subjected to an impact, replace it with a new one.

      Tech Tips

      for RHD:

      Depress and hold the brake pedal.

   2. Connect the connector.

   3. for RHD:

      Install the stop light switch assembly.

      Click here

2. INSTALL ACCELERATOR PEDAL

   
   

   1. Install the accelerator pedal with the 2 bolts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   2. Attach the 4 claws to install the accelerator pedal pad.

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

   Click here

4. INSTALL MAIN BODY ECU (for RHD)

   Click here