CAMSHAFT COMPONENTS
ILLUSTRATION
| *1 | IGNITION COIL ASSEMBLY | *2 | NO. 1 RADIATOR HOSE |
| *3 | NO. 2 ENGINE OIL LEVEL DIPSTICK GUIDE | *4 | NO. 3 ENGINE WIRE |
| *5 | NO. 3 RADIATOR HOSE | *6 | OIL COOLER OUTLET HOSE BRACKET |
| *7 | SPARK PLUG | *8 | WATER HOSE SUB-ASSEMBLY |
| *9 | ENGINE OIL LEVEL DIPSTICK | *10 | CLIP |
| *11 | O-RING | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | CYLINDER HEAD COVER SUB-ASSEMBLY | *2 | CYLINDER HEAD COVER SUB-ASSEMBLY LH |
| *3 | NO. 1 ENGINE COVER SUB-ASSEMBLY | *4 | NO. 1 FUEL TUBE SUB-ASSEMBLY |
| *5 | SPARK PLUG TUBE GASKET | *6 | VVT SENSOR (for Intake Side of Bank 1) |
| *7 | VVT SENSOR (for Exhaust Side of Bank 1) | *8 | VVT SENSOR (for Intake Side of Bank 2) |
| *9 | VVT SENSOR (for Exhaust Side of Bank 2) | *10 | CYLINDER HEAD COVER GASKET |
| *11 | GASKET | *12 | CAMSHAFT BEARING CAP OIL HOLE GASKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1) | *2 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1) |
| *3 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2) | *4 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2) |
| *5 | O-RING | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| ★ | Precoated part | - | - |
ILLUSTRATION
| *1 | CAMSHAFT | *2 | CAMSHAFT BEARING CAP |
| *3 | CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY | *4 | CAMSHAFT TIMING GEAR ASSEMBLY |
| *5 | CAMSHAFT TIMING GEAR BOLT | *6 | CHAIN SUB-ASSEMBLY |
| *7 | NO. 1 CHAIN TENSIONER ASSEMBLY | *8 | NO. 2 CAMSHAFT |
| *9 | NO. 2 CHAIN TENSIONER ASSEMBLY | *10 | TIMING CHAIN COVER PLATE |
| *11 | FUEL PUMP LIFTER HOUSING | *12 | NO. 2 CHAIN SUB-ASSEMBLY (for Bank 1) |
| *13 | GASKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | CAMSHAFT BEARING CAP | *2 | CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY |
| *3 | CAMSHAFT TIMING GEAR ASSEMBLY | *4 | CAMSHAFT TIMING GEAR BOLT |
| *5 | CHAIN SUB-ASSEMBLY | *6 | NO. 3 CHAIN TENSIONER ASSEMBLY |
| *7 | NO. 3 CAMSHAFT SUB-ASSEMBLY | *8 | NO. 4 CAMSHAFT SUB-ASSEMBLY |
| *9 | NO. 2 CHAIN SUB-ASSEMBLY (for Bank 2) | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |