HYBRID BATTERY SYSTEM, Diagnostic DTC:P060B16

DTC Code DTC Name
P060B16 Hybrid/EV Battery Energy Control Module A/D Processing Circuit Voltage Below Threshold

DESCRIPTION

The battery ECU assembly monitors its internal operation and will store these DTCs when it detects an internal malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P060B16 Hybrid/EV Battery Energy Control Module A/D Processing Circuit Voltage Below Threshold

ECU internal malfunction

(1 trip detection logic)

 Battery ECU assembly Comes on

Master Warning Light:

Comes on

CONFIRMATION DRIVING PATTERN

Tech Tips

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click here


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG) and turn the GTS on.

  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  4. Turn the power switch off and wait for 2 minutes or more.

  5. Turn the power switch on (IG) and turn the GTS on.

  6. With power switch on (IG) and wait for 30 seconds or more.

  7. Enter the following menus: Powertrain / HV Battery / Utility / All Readiness.

  8. Check the DTC judgment result.

    Tech Tips


    • If the judgment result shows NORMAL, the system is normal.

    • If the judgment result shows ABNORMAL, the system has a malfunction.

    • If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.

PROCEDURE


  1. CHECK DTC OUTPUT (HV BATTERY, HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / HV Battery and Hybrid Control / Trouble Codes.

    4. Check for DTCs.


      Powertrain > HV Battery > Trouble Codes
      Powertrain > Hybrid Control > Trouble Codes
      Result
      Result Proceed to
      "P060B16" only is output, or DTCs except the ones in the table below are also output. A
      DTCs of hybrid battery system in the table below are output. B
      DTCs of hybrid control system in the table below are output. C
      System Relevant DTC
      Hybrid battery system P060A47 Hybrid/EV Battery Energy Control Module Monitoring Processor Watchdog / Safety MCU Failure
      P060B49 Hybrid/EV Battery Energy Control Module A/D Processing Internal Electronic Failure
      P060687 Hybrid/EV Battery Energy Control Module Processor to Monitoring Processor Missing Message
      P0A9B11 Hybrid/EV Battery Temperature Sensor "A" Circuit Short to Ground
      P0AAC11 Hybrid/EV Battery Air Temperature Sensor "A" Circuit Short to Ground
      P0AC511 Hybrid/EV Battery Temperature Sensor "B" Circuit Short to Ground
      P0ACA11 Hybrid/EV Battery Temperature Sensor "C" Circuit Short to Ground
      P0AE811 Hybrid/EV Battery Temperature Sensor "D" Circuit Short to Ground
      P0BC211 Hybrid/EV Battery Temperature Sensor "E" Circuit Short to Ground
      P0C3311 Hybrid/EV Battery Temperature Sensor "F" Circuit Short to Ground
      Hybrid control system P0A1F94 Hybrid/EV Battery Energy Control Module Unexpected Operation

    5. Turn the power switch off.


    B

    GO TO DTC CHART (HYBRID BATTERY SYSTEM) Click here

    C

    GO TO DTC CHART (HYBRID CONTROL SYSTEM) Click here

    A

  2. REPLACE BATTERY ECU ASSEMBLY

    Click here

    Result
    Proceed to
    NEXT

    NEXT

    COMPLETED