HYBRID CONTROL SYSTEM, Diagnostic DTC:P0A1B49

DTC Code DTC Name
P0A1B49 Drive Motor "A" Control Module Internal Electronic Failure

DESCRIPTION

The MG ECU, which is built into the inverter with converter assembly, monitors its internal operation and will store DTCs if the system is malfunctioning.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P0A1B49 Drive Motor "A" Control Module Internal Electronic Failure

MG ECU internal malfunction:

Calculation check error

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
Related Data List
DTC No. Data List
P0A1B49 -

CONFIRMATION DRIVING PATTERN

Tech Tips

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click here


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG) and turn the GTS on.

  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  4. Turn the power switch off and wait for 2 minutes or more.

  5. Turn the power switch on (IG) and turn the GTS on.

  6. With power switch on (IG) and wait for 5 seconds or more.

  7. Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.

  8. Check the DTC judgment result.

    Tech Tips


    • If the judgment result shows NORMAL, the system is normal.

    • If the judgment result shows ABNORMAL, the system has a malfunction.

    • If the judgment result shows INCOMPLETE or N/A, perform the normal judgment procedure again.

PROCEDURE


  1. REPLACE INVERTER WITH CONVERTER ASSEMBLY

    Click here

    Result
    Proceed to
    NEXT

    NEXT

    COMPLETED