HYBRID CONTROL SYSTEM UTILITY


  1. Tech Tips


    • With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.

    • You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.

    ALL READINESS


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Clear the DTCs even if no DTCs are stored.


      Powertrain > Hybrid Control > Clear DTCs

    5. Turn the power switch off and wait for 2 minutes or more.

    6. Turn the power switch on (IG).

    7. Perform the DTC judgment driving pattern to run the DTC judgment.

    8. Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.


      Powertrain > Hybrid Control > Utility
      Tester Display
      All Readiness

    9. Input the DTCs to be confirmed.

    10. Check the DTC judgment result.

      GTS Display Description
      Normal

      • DTC judgment completed

      • System normal
      Abnormal

      • DTC judgment completed

      • System abnormal
      Incomplete

      • DTC judgment not completed

      • Perform the driving pattern
      N/A

      • Unable to perform DTC judgment

      • Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit

      • Perform the driving pattern

      If the judgment result shows Incomplete or N/A, perform the DTC confirmation driving pattern again.

    11. Turn the power switch off.

  2. DIAGNOSIS RELATED INFORMATION


    1. Check for diagnosis related information.


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Powertrain / Hybrid Control / Utility / Diagnosis Related Information.


        Powertrain > Hybrid Control > Utility
        Tester Display
        Diagnosis Related Information

      5. Check the Diagnosis Related Information, and then write them down.

    2. Clear diagnosis related information.

      Note

      Clearing the DTCs will also clear the diagnosis related information.


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

      5. Clear the diagnosis related information and freeze frame data.

      6. Turn the power switch off.