CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE VVT SENSOR (for Intake Side of Bank 1)


    1. B000QM4

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


    1. B000PBP

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  4. REMOVE VVT SENSOR (for Intake Side of Bank 2)


    1. B000PEI

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.

  5. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


    1. B000RJV

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

      Note

      If the VVT sensor has been struck or dropped, replace it.