ECM INSTALLATION

CAUTION / NOTICE / HINT

Note

If the ECM has been struck or dropped, replace it.

PROCEDURE


  1. INSTALL NO. 2 ECM BRACKET


    1. Install the No. 2 ECM bracket to the ECM with the 2 bolts.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

      Note

      If the ECM has been struck or dropped, replace it.

  2. INSTALL NO. 1 ECM BRACKET


    1. Install the No. 1 ECM bracket to the ECM with the 2 bolts.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

      Note

      If the ECM has been struck or dropped, replace it.

  3. INSTALL ECM


    1. Install the ECM with the 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      If the ECM has been struck or dropped, replace it.

    2. B004B2I

      Connect the 2 connectors to the ECM and push down the lever to lock it.

      Note


      • When connecting the connectors, make sure that dirt, water or other foreign matter does not become stuck between the connectors and other parts.

      • Make sure that the 2 levers are securely locked.

  4. INSTALL LOWER RADIATOR AIR DEFLECTOR

    Click here

  5. INSTALL RADIATOR SUPPORT TO FRAME SEAL RH

    Click here

  6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here