GENERAL MAINTENANCE CHASSIS


  1. INSPECT STEERING LINKAGE AND GEAR BOX


    1. Check the steering wheel free play.

      Click here

    2. Check the steering linkage for looseness or damage.


      1. Check that the tie rod ends do not have any play.

      2. Check that the dust seals and boots are not damaged.

      3. Check that the boot clamps are not loose.

      4. Check that the steering gear housing is not damaged.

      5. Check that the connectors are properly connected to the steering gear housing.

  2. INSPECT DRIVE SHAFT BOOTS


    1. Check the drive shaft boots for loose clamps, grease leakage, kinks or damage.

  3. INSPECT SUSPENSION BALL JOINT AND DUST COVER


    1. Inspect the ball joints for excessive looseness.


      1. Jack up the front of the vehicle and place wooden blocks with a height of 180 to 200 mm (7.09 to 7.87 in.) under the front tires.

      2. Lower the vehicle until the front coil spring has about half its ordinary load. Place stands under the vehicle for safety.

      3. Check that the front wheels are pointing straight ahead. Use wheel chocks on all 4 wheels.

      4. Using a lever, pry up the end of the lower arm. Check the amount of play.

        If there is any play, replace the ball joint.

      5. Check the dust cover for damage.

      6. INSPECT HYBRID VEHICLE TRANSMISSION FLUID


        1. Visually check the transmission for fluid leaks. If fluid is leaking, find the cause and repair it.

      7. REPLACE HYBRID VEHICLE TRANSMISSION FLUID


        1. Replace the hybrid vehicle transmission fluid.

          Click here

      8. INSPECT REAR DIFFERENTIAL OIL


        1. Visually check the differentia for fluid leaks. If fluid is leaking, find the cause and repair it.

        2. Inspect the rear differential oil.

          Click here

      9. REPLACE REAR DIFFERENTIAL OIL


        1. Replace the rear differential oil.

          Click here

      10. INSPECT FRONT AND REAR SUSPENSION


        1. Inspect the front and rear suspension.