NAVIGATION SYSTEM Disc cannot be Ejected

CAUTION / NOTICE / HINT

Note

The following malfunctions may occur if a radio receiver assembly from another vehicle is installed to this vehicle. Therefore, when replacing the radio receiver assembly, be sure to replace it with new one.


  • Communication malfunction DTC is output

  • Does not operate normally

Tech Tips

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click here

PROCEDURE


  1. CHECK OPERATION


    1. Press the disc eject switch of the radio receiver assembly for 5 seconds or more and check that the disc is ejected.

      OK
      Disc is ejected.
      Result
      Proceed to
      OK
      NG

    NG

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    OK

  2. REPLACE DISC AND RECHECK


    1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Disc is ejected.
      Result
      Proceed to
      OK
      NG

    OK

    END (DISC IS DEFECTIVE)

    NG

    REPLACE RADIO RECEIVER ASSEMBLY Click here